Follow these steps to install the cartridges that shipped with your product.
Figura : Cartridges that shipped in the box
-
Locate the two slots on the left and right sides of the product.
Figura : Locate the two slots on the sides of the product
-
Slide your fingers into the two slots, and then lift up to open the cartridge access door. The carriage moves into the cartridge access area.
Figura : Open the cartridge access door
-
On one of the cartridges, pull the orange pull-tabstraight back to remove the plastic wrap.
Figura : Remove the plastic wrap
-
Twist the orange cap counterclockwise to snap it off the cartridge.
Figura : Remove the orange cap
-
Slide the cartridge into the correct slot as shown. The color-coded icons on the cartridge and in the printhead must match.
Figura : Insert the cartridge
-
Press down on the cartridge until it clicks firmly into place.
Figura : Press the cartridge into place
-
Repeat these steps for each cartridge.
-
Close the cartridge access door.
Figura : Close the cartridge access door