HP LaserJet P1005, P1006, P1505, and P1505n Printers - Changing the Pickup Roller

  Attenzione:

Failure to complete this procedure might damage the printer.

1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer to cool.
   Figura : Unplugging the power cord from the printer

   
2. Open the print cartridge door, and remove the print cartridge.

     Attenzione:

   To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print cartridge with a sheet of paper.

   Figura : Removing the print cartridge

   
3. Find the pickup roller.
   Figura : Pickup roller

   
4. Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front.
   Figura : Releasing the tabs on either side of the rollers

   
5. Gently pull the pickup roller up and out.
   Figura : Removing the pickup roller

   
6. Position the new pickup roller in the slot. The circular and rectangular slots on each side will prevent you from installing the roller incorrectly.
   Figura : Installing a new pickup roller

   
7. Rotate the top of the new pickup roller away from you until both sides snap into place.
   Figura : Placing the new pickup roller correctly

   
8. Reinstall the print cartridge, and close the print cartridge door.
   Figura : Reinstalling the print cartridge

   
9. Plug the printer into the power outlet, and then turn on the printer.
   Figura : Plugging the power cord into the printer