HP Scanjet 4370 Photo Scanner - Install the Windows 7 solution created for a similar product to enable full feature scan software

note:

HP recommends that you first remove existing HP Scanjet software before installing the latest HP software or driver to ensure that all of the latest fixes and updates are installed correctly for the newer version.

1. Disconnect the USB cable from the product. For scanners on a network, skip this step.
2. Click Start, click Control Panel, click Programs, and then select Uninstall a program.
3. Uninstall all HP programs associated with the device.
   1. Check whether any of the following programs are listed:
      • HP Imaging Device Functions
      • HP Photosmart Essential
      • HP Scanjet (with product name and software version number)
      • HP Solution Center
      • HP Update
      • HP OCR Software
      • OCR Software by I.R.I.S

      note:

      Do not remove any HP items other than those mentioned above if the computer is manufactured by HP or Compaq.

   2. For each program listed, click the program name and then click Uninstall.
4. Wait while the computer reboots.

   note:

   Uninstalling HP Photosmart Essentials and/or HP Solution Center will force the system to reboot. If for some reason a reboot does not occur automatically, restart the computer before continuing.

1. Go to www.hp.com/go/support, click Drivers & Software, type HP Scanjet G3010 Photo Scanner in the Search field, and then click Search.

   note:

   You might need to select the product model from a list of search results.

2. Select your software/driver language and then select Microsoft Windows 7.

   note:

   This solution applies to both 32-bit and 64-bit operating systems.

3. Under the Driver section, locate the full feature software.
   

   note:

   This download contains the required software with full features needed to scan pictures, documents, and film, and contains HP Photosmart software to manage, edit, and share images. Due to the size of this download, please allow enough time for the download to complete and do not interrupt the download process.

   If you are using a dial-up connection, HP recommends that you order this software on CD. You can do this by locating the option under the Order Physical Media section and following the provided instructions.

4. Click Download and click Run.
5. When instructed, connect the USB cable to the HP Scanjet 4370 Photo Scanner and to the computer, and then follow the onscreen instructions to complete the installation.

   note:

   You might need to restart the computer after the installation completes.