solution Contentsolution Content

HP Photo, Photosmart and Scanjet Scanners - Media Supported by the ADF, XPA/TMA and APF

Introduction

These scanners accessories work best when the originals (paper, slides, negatives and photos) meet some criteria. Please consult the following sections in order to know the main specifications required by your HP scanner accessory.
note:
To verify whether a certain HP Scanjet accessory is included with your HP Scanjet model, check the content that is listed on your HP Scanjet box because the content could vary depending on the HP Scanjet model purchased. Otherwise, your HP distributor will be pleased to solve your enquiries about optional accessories for your HP Scanjet model. Click here to find your nearest HP distributor

Media supported by the ADF (Automatic Document Feeder)

HP Scanner model
HP accessory available
Maximum paper size
Minimum paper size
Maximum number of pages held by the ADF input and output trays
Paper weight
Notes
Advice
4500c and 5550c
4500c and 5550c ADF
215.9 x 355.6 mm (8.5 x 14 inches)
88.9 x 127 mm (3.5 x 5 inches)
50, depending on the type of media being loaded
60 to 90 grams per square meter (g/m2) (16 to 24 lb bond)
Avoid putting multipart forms, transparencies, magazine pages, gum-backed pages, and lightweight paper in the ADF. Before placing an original in the ADF, check for and remove curls, wrinkles, staples, paperclips, and any other attached material.
If your item does not meet these guidelines, use the scanner glass
5590 and 5590P
5590 and 5590P ADF
215.9 x 355.6 mm (8.5 x 14 inches)
89 x 127 mm (3.5 x 5 inches)
50, depending on the type of media being loaded
60 to 90 grams per square meter (g/m2) (16 to 24 lb bond)
Avoid putting multipart forms, transparencies, magazine pages, gum-backed pages, and lightweight paper in the ADF. Before placing an original in the ADF, check for and remove curls, wrinkles, staples, paperclips, and any other attached material.
If your item does not meet these guidelines, use the scanner glass
5400c, 5470c and 5490c
5400c, 5470c and 5490c ADF
215.9 x 355.6 mm (8.5 x 14 inches)
88.9 x 127 mm (3.5 x 5 inches)
25, depending on the type of media being loaded
60 to 90 grams per square meter (g/m2) (16 to 24 lb bond)
Avoid putting multipart forms, transparencies, magazine pages, gum-backed pages, and lightweight paper in the ADF. Before placing an original in the ADF, check for and remove curls, wrinkles, staples, paperclips, and any other attached material.
If your item does not meet these guidelines, use the scanner glass
5200, 5300c, 5370c, 6200c and 6250c
6200c and 6250c ADF
215.9 x 355.6 mm (8.5 x 14 inches)
147.3 x 210.8 mm (5.8 x 8.3 inches)
25, depending on the type of media being loaded
60 to 105 grams per square meter (g/m2) (16 to 28 lb bond)
Avoid putting multipart forms, transparencies, magazine pages, gum-backed pages, and lightweight paper in the ADF. Before placing an original in the ADF, check for and remove curls, wrinkles, staples, paperclips, and any other attached material.
If your item does not meet these guidelines, use the scanner glass
6300c, 6350c and 6390c
6300c, 6350c and 6390c ADF
25, depending on the type of media being loaded
7400c, 7450c and 7490c
7400c, 7450c and 7490c ADF
50, depending on the type of media being loaded

Media supported by the XPA (Transparency Adapter) or the TMA (Transparent Materials Adapter)

HP Scanner model
HP accessory available
Format size
4400c, 4470c, 5400c, 5470c and 5490c
4400c, 4470c, 5400c, 5470c and 5490c XPA
Three 35mm (1.37 inches) slides
One 35mm (1.37 inches) negative strip
5300c, 5370c, 6300c, 6350c, 6390c, 7400c, 7450c and 7490c
5300c, 5370c, 6300c, 6350c, 6390c, 7400c, 7450c and 7490c XPA
One transparency (up to 12.7 x 12.7 cms or 5 x 5 inches)
One 35mm (1.37 inches) slide
3500c, 3530c, 3570c, 3670, 3690, 3770, 3800, 3970 and 4370
3500c, 3530c, 3570c, 3670, 3690, 3770, 3800, 3970 and 4370 TMA (integrated in the scanner lid)
Two 35mm (1.37 inches) slides
One 35mm (1.37 inches) negative strip
3010
TMA (integrated in the scanner lid)
Two 35mm (1.37 inches) slides
Two 35mm (1.37 inches) negative frames
4070
4070 TMA (integrated in the scanner lid)
Four 35mm (1.37 inches) slides
2 negative strips (maximum of 2 frames per strip)
4500, 4570, 5500, 5550, 5590 and 5590P
4500, 4570, 5500, 5550, 5590, 5590P and 7650 TMA
Three 35mm (1.37 inches) slides
One 35mm (1.37 inches) negative strip
4600, 4670, 4600p, 4670v and 4670vp
4600, 4670, 4600p, 4670v and 4670vp TMA
One 35mm (1.37 inches) slide
One 35mm (1.37 inches) negative
4850
4850 TMA (integrated in the scanner lid)
Four 35mm (1.37 inches) slides
One 35mm (1.37 inches) negative strip
4890
4890 TMA (integrated in the scanner lid)
Sixteen 35 mm (1.37 inches) slides
30 negative frames
6 medium-format film
1 large-format film
G4010
TMA (integrated in the scanner lid)
Up to five 35 mm slides or six 35 mm negative frames
G4050
TMA (integrated in the scanner lid) Slides, negatives, and medium- and large-format film have their own unique media holders called "Templates".
Up to sixteen 35 mm slides, thirty 35 mm negative frames, up to two medium format film frames (120 roll film), or one large format film frame (220 roll film).

Media supported by the APF (Automatic Photo Feeder)

HP Scanner model
HP accessory available
Format size
Format weight
Format finish
4570 and 5500
4570 and 5500 APF
Maximum photo size: 101.6 mm x 152.4 mm (4 x 6 inches)
Minimum photo size: 76.2 mm x 127 mm (3 x 5 inches)
Photographic paper maximum weight: 0.03 g/m2 (0.008 lb bond)
Photographic paper minimum weight: 0.02 g/m2 (0.005 lb bond)
Glossy, satin (semi-gloss), and matte photographic paper
5530