solution Contentsolution Content

HP Designjet 10ps and 20ps Printers - Product Specifications

Figure : HP Designjet 10ps and 20ps

Model numbers

Product
Description
Part number
HP Designjet 10ps
Client-based RIP
C7790A
HP Designjet 20ps
Server-based RIP
C7790B

Printer features

Color accuracy

  • Professional output with consistent color
  • Internal color sensor, allowing color correction to be applied to images
  • Automatic PANTONE®* calibration
  • PANTONE®* certified
  • ICC color profile support
  • Press emulation
  • Apple ColorSync compatible

Image quality

  • Six-color printing (CMYKcm - cyan, magenta, yellow, black, light cyan, and light magenta)
  • Wide color gamut
  • 2400 x 1200 dots per inch, high resolution printing
  • PostScript® 3 through the HP Designjet 10/20ps software RIP for Apple Macintosh and Windows

Speed

  • Two minutes per page in normal color mode for A3+/B+-size glossy media
  • Four minutes per page in best color mode for A3+/B+-size glossy media
  • Ten pages per minute black, fast mode
  • USB and Parallel, EIO slot

Media

  • Proofing media
  • 13 x 19-inch media. Printing area B/A3 full bleed
  • Flat pass-through for thick media up to 0.52 mm
  • Output tray holding 50 sheets
  • Input tray holding 150 sheets
  • Second input tray holding 250 sheets
  • Alternative media feed (bypass) tray holding 10 sheets
  • Rear path through for manual single-sheet feed

Additional features

  • Front panel with “gas gauge” and printer status
  • Space efficient. Front access
  • Smart printing: job cancel key, hue shift compensation, pen alignment, black depletion, nozzle-out compensation
  • Dye inks in black and colors

System requirements

The following table lists the minimum and high volume recommended system requirements to run RIP software. System requirements vary according to the size of the files to be printed, the output device used, and other variables. System requirements and intended use of the software determine what hardware and software setup is needed to get the most out of RIP software. When working with relatively small files, the minimum setup may be sufficient. Similarly, when working with large files, consider the recommended setup. Consult the product dealer for advice when choosing a system.

HP Designjet 10ps

Macintosh

Feature
Minimum
Recommended
Processor
Macintosh G3
Mac G4, 300 MHz or faster
RAM
128 MB RAM with at least 196 MB of virtual memory enabled
128 MB RAM with at least 196 MB of virtual memory enabled
Install space
200 MB
200 MB
Working disk space
1 GB or more for storage
2 GB or more for storage
Operating system
Mac OS 8.6 with Appearance Manager and ColorSync installed
Mac OS 9.x with Appearance Manager and ColorSync installed
Video
800 x 600 screen resolution with 16-bit color
1024 x 768 screen resolution with 16-bit color
Others
4x CD-ROM drive
16x CD-ROM drive
USB connection
Network (requires optional Network Print Server)
10BaseT with TCP/IP installed
100BaseTX with TCP/IP installed

Windows

Feature
Minimum
Recommended
Processor
Pentium® II 350 MHz
Pentium III 500 MHz
RAM
128 MB
256 MB or more
Install space
200 MB
200 MB
Working disk space
1 GB
2 GB
Operating system
Running latest version of:
Windows 98
Windows NT 4.0 (see note)
Windows 2000
Windows Me
Running latest version of:
Windows 98
Windows NT 4.0 (see note)
Windows 2000
Windows Me
Video
Parallel
800 x 600 screen resolution with 16-bit color
ECP Capable
1024 x 768 screen resolution with 16-bit color
ECP Capable
Others
4x CD-ROM drive
16x CD-ROM drive
USB connection
Network (requires optional Network Print Server
10BaseT with TCP/IP installed
100BaseTX with TCP/IP installed
note:
Windows NT 4.0 requires Internet Explorer 5 or greater and Service Pack 4 or higher.

HP Designjet 20ps

Macintosh

Feature
Minimum
Recommended
Processor
Macintosh G3
Mac G4, 300 MHz or faster
RAM
128 MB RAM with at least 196 MB of virtual memory enabled
256 MB RAM with at least 196 MB of virtual memory enabled
Install space
200 MB
200 MB
Working disk space
1 GB or more for storage
2 GB or more for storage
Operating system
Mac OS 8.6 with Appearance Manager and ColorSync installed
Mac OS 9.x with Appearance Manager and ColorSync installed
Video
800 x 600 screen resolution with 16-bit color
1024 x 768 screen resolution with 16-bit color
Others
4x CD-ROM drive
16x CD-ROM drive
USB connection
Network (requires optional Network Print Server)
10BaseT with TCP/IP installed
100BaseTX with TCP/IP installed

Windows

Feature
Minimum
Recommended
Processor
Pentium II 350 MHz
Pentium III 500 MHz
RAM
128 MB
256 MB or more
Install space
200 MB
200 MB
Working disk space
1 GB
2 GB
Operating system
Windows NT Server
Windows 2000 Server
Video
800 x 600 screen resolution with 16-bit color
1024 x 768 screen resolution with 16-bit color
Others
4x CD-ROM drive
16x CD-ROM drive
USB connection
Parallel
ECP capable
ECP capable
Network (requires optional Network Print Server)
10BaseT with TCP/IP installed
100BaseTX with TCP/IP installed

Memory

16 MB RAM

Connectivity

Languages

Adobe® PostScript® 3™ via software

HP Designjet 10ps Software RIP

  • CMYK emulation (SWOP, Euroscale, Toyo, DIC) and capability to add new emulations (new ICC profiles)
  • RGB emulations
  • Automatic black replacement
  • Capability of adding new media
  • Layout management
  • Queue management
  • File types (PostScript 2 and 3, PDF, EPS, TIFF, JPEG, BMP)
  • Standalone solution (supports one to three users)

HP Designjet 20ps Software RIP

  • CMYK emulation (SWOP, Euroscale, Toyo, DIC) and capability to add new emulations (new ICC profiles)
  • RGB emulations
  • Automatic black replacement
  • Capability of adding new media
  • Layout management
  • Queue management
  • File types (PostScript 2 and 3, PDF, EPS, TIFF, JPEG, BMP)
  • Client/Server solution (supports three users and above)

Drivers

  • Adobe PostScript with HP software RIP for
    • Windows 98, Me, NT 4.0, 2000
    • Macintosh 8.6 or later (MacOSX in classic mode)
  • Office drivers for Windows

Interfaces

  • Printer Connection: USB; Centronics parallel, IEEE 1284-compliant; HP Jetdirect 610N network card, HP Jetdirect 615N network card
  • Network Protocol: TCP/IP; Apple Talk
  • Network I/0: Ethernet 10/100 Base TX, 10Base 2

Operating environment

Temperature

  • 5 to 30 degrees Centigrade (41 to 86 degrees Fahrenheit) (operating)
  • -40 to 70 degrees Centigrade (40 to 158 degrees Fahrenheit) (storage and transport)

Humidity

  • 20 to 80 percent relative humidity (operating)

Power supply

Requirements

  • 100 to 240 V AC +/- 10% auto-ranging
  • 50 to 60 Hz, 3 amps maximum

Consumption

  • 65 watts maximum

Acoustic emissions

Pressure

  • Printing: 56 dB (A)
    Per ISO DP7779. Typical emissions at 1 meter by stander position for pressure.

Dimensions

Width

  • 92 mm (28.5 inch)
    554 mm (21.8 inch) (for shipping)

Depth

  • 23 mm (17.41 inch) (with media tray closed)
  • 23 mm (21.35 inch) (with media tray open)
    858 mm (33.8 inch) (for shipping)

Height

  • 16 mm (8.78 inch)
    462 mm (18.2 inch) (for shipping)

Weight

  • 5 Kg (27.55 lb)
    [20PS]: + 3 Kg (6.61 lb) (second sheet feeder)
    [10PS]: 17 Kg (37.48 lb) (for shipping)
    [20PS]: 20 Kg (44.1 lb) (for shipping)

Media sizes

The HP Designjet 10/20ps printer can support sheet media between these dimensions:
Dimension
Minimum
Maximum
Width
76.2 mm (3 inches)
330.2 mm (13 inches)
Length
127 mm (5 inches)
482.6 mm (19 inches)

Media supported

Proofing media

Media
Supply number
Format
HP Proofing-glossy
Q1970A
B+
HP Proofing-semi-gloss
C7884A
B+
HP Proofing-matte
Q1967A
B+

Photo media

HP Premium Photo Paper (glossy)
15 sheet package
C6039A
A
50 sheet package
C6979A
A
15 sheet package (not available in the US)
C6040A
A4
20 sheet package (not available in the US)
C6059A
A3
20 sheet package
C6058A
B
HP Premium Plus Photo Paper (glossy)
20 sheet package
C6831A
A
20 sheet package (not available in the US)
C6832A
A4
HP Premium Plus Photo Paper (matte)
20 sheet package
C6950A
A
20 sheet package (not available in the US)
C6951A
A4
HP Colorfast Photo Paper
20 sheet package (not available in the US)
C7014A
A4
20 sheet package
C7013A
A

Coated and heavy-coated media

Media
Part number
Format
HP Premium Inkjet Paper
200 sheet package
51634Y
A
200 sheet package (not available in the US)
51634Z
A4
100 sheet package
C1855A
B
100 sheet package (not available in the US)
C1856A
A3
HP Professional Brochure and Flyer Paper (matte finish)
50 sheet package
C6955A
A
HP Professional Brochure and Flyer Paper (two-sided glossy)
50 sheet package
C6817A
A
50 sheet package (not available in the US)
C6818A
A4
20 sheet package
C6820A
B
20 sheet package (not available in the US)
C6821A
A3

Plain paper

Media
Part number
Format
HP Bright White Inkjet Paper
500 sheet package
C1824A
A
200 sheet package
C5976A
A
500 sheet package (not available in the US)
C1825A
A4
200 sheet package (not available in the US)
C5977A
A4
200 sheet package (not available in the US)
C1858A
A3

Films

Media
Part number
Format
HP Premium Inkjet Transparency Film
50 sheet package (not available in the US)
C3835A
A4

Margins

The HP Designjet 10/20/50ps printer requires these margins:
Normal
With duplexer
Top margin
3 mm (0.12 inch)
12 mm (0.47 inch)
Side margins (left and right)
5 mm (0.20 inch)
5 mm (0.20 inch)
Bottom margin
12 mm (0.47 inch)
12 mm (0.47 inch)

Ink information

The HP Designjet 10/20/50ps printer uses the following ink supplies:
Color
Ink cartridge
Printhead
Yellow
C4913A HP 82 (69 ml)
C4813A HP 11
Black
C5016A HP 84 (69 ml)
C5019A HP 84
Magenta
C4837A HP 11 (28 ml)
C4812A HP 11
Cyan
C4836A HP 11 (28 ml)
C4811A HP 11
Light magenta
C5018A HP 84 (69 ml)
C5021A HP 84
Light cyan
C5017A HP 84 (69 ml)
C5020A HP 84