Learn how to increase the print speed and set up the HP High Speed feature on an HP LaserJet Enterprise or HP LaserJet Managed printer.
The HP High Speed setting is an option available on select HP LaserJet Enterprise or HP LaserJet Managed printers (see the Applicable printers section) running HP FutureSmart firmware version 4.10 or newer.
When enabled, this option increases the printer speed to print seven pages per minute (ppm) faster than the default print speed (when printing on a Letter or A4-size paper).
Paper size1 |
Default print speed |
HP High Speed print speed |
---|---|---|
A4 |
43 ppm |
50 ppm |
Letter |
45 ppm |
52 ppm |
Use the following table to view the required conditions for the HP High Speed feature.
The HP High Speed print speed will reduce for duplex jobs and when printing in Tray 1. This feature does not support paper that is longer than A4-size or light, heavy, or narrow paper. It is recommended that the humidity in the room is within the recommended specifications for the printer and is not below 15°C.
Factors for print speed |
Supported conditions for HP High Speed mode |
---|---|
Paper size |
Letter or A4-size paper |
Paper type |
Plain mode |
Print job |
Simplex (single-sided) print job |
Trays |
Tray 2 and optional 500-sheet input trays |
Temperature |
Not below 15 degrees Celsius (15°C) |
This document applies to the following printer series:
HP LaserJet Enterprise M406
HP LaserJet Enterprise MFP M430
HP Color LaserJet Enterprise M455
HP Color LaserJet Enterprise MFP M480
HP LaserJet Enterprise M507
HP LaserJet Enterprise MFP M528
HP LaserJet Managed E40040
HP LaserJet Managed MFP E42540
HP Color LaserJet Managed E45028
HP Color LaserJet Managed MFP E47528
HP LaserJet Managed E50145
HP LaserJet Managed MFP E52645
Learn how to increase the print speed of an HP LaserJet Enterprise or HP LaserJet Managed printer using the printer control panel or the Embedded Web Server (EWS).
Make sure the printer supports this feature. See the Applicable printers section.
Update the printer firmware.
Use one of the following methods to enable the HP High Speed print speed option.
Follow these steps to enable the HP High Speed feature from the printer control panel.
Follow these steps to enable the HP High Speed feature from the Embedded Web Server (EWS).