solution Contentsolution Content

HP EliteDesk 800 G4 Workstation Edition - Components

Standard configuration features

Features may vary depending on the model. For support assistance and to learn more about the hardware and software installed on your computer model, run the HP Support Assistant utility.
note:
This computer model can be used in a tower orientation or a desktop orientation.
Figure : Standard configuration of the computer, monitor, keyboard, and mouse

Front panel components

Drive configuration may vary by model. Some models have a bezel blank covering one or more drive bays.
Figure : Identifying the front panel components
Front panel components
Components
Components
1
5.25-inch half-height drive bay (behind bezel)
7
Audio-out (headphone) jack
2
Slim optical drive (optional)
8
USB port with HP Sleep and Charge
3
SD memory card reader (optional)
9
USB port
4
Power button
10
USB SuperSpeed ports (2)
5
Hard drive activity light
11
USB Type-C port
6
Audio-out (headphone)/Audio-in (microphone) combo jack
note:
The combo jack supports headphones, line output devices, microphones, line input devices, or CTIA-style headsets.
note:
The light on the power button is normally white when the power is on. If it is flashing red, there is a problem with the computer and it is displaying a diagnostic code. Refer to to interpret the code.

Rear panel components

Figure : Identifying the rear panel components
Rear panel components
Components
Components
1
Audio-out jack for powered audio devices
6
Audio-in jack
2
Dual-Mode DisplayPort connectors (2)
7
Network jack
3
Optional port
8
Serial port (optional)
4
USB ports (2)
9
Power cord connector
5
USB SuperSpeed ports (4)
note:
Your model may have additional optional ports available from HP.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the integrated graphics on the system board may be used. The specific graphics card installed and software configuration will determine the behavior.
The system board graphics can be disabled by changing settings in BIOS F10 Setup.

Serial number location

Each computer has a unique serial number and a product ID number that are located on the exterior of the computer. Keep these numbers available for use when contacting customer service for assistance.
Figure : Locating the serial number

Additional support options

Try one of our automated tools or diagnostics
Ask a question on our HP Support Community page
Get in touch with one of our support agents

Enter a topic to search our knowledge library

What can we help you with?