This document provides the procedure to install the optional printer stand for the following printers:
-
HP LaserJet Enterprise M506
-
HP LaserJet Managed M506
-
HP LaserJet Enterprise M507
-
HP LaserJet Enterprise MFP M527
-
HP LaserJet Managed MFP M527
-
HP LaserJet Enterprise MFP M528
-
HP LaserJet Managed E50045
-
HP LaserJet Managed E50145
-
HP LaserJet Managed MFP E52545
-
HP LaserJet Managed MFP E52645
Figure : Printer stand
![](/wcc-assets/document/images/670/c06486121.png)
Allow enough space around the printer to open all doors and trays.
Figure : Space requirements
![](/wcc-assets/document/images/994/c06196073.png)
-
Press the Power button to turn off the printer.Figure : Turn off the printer
-
Disconnect the power cord and USB or network cable.For MFP models with fax: Disconnect the phone cord for the fax.Figure : Disconnect the cables
-
Open the 550-sheet paper tray.
caution:
Do not extend more than one paper tray at a time.Figure : Open the 550-sheet paper tray -
Lift the lever to unlock the paper tray.
note:
If multiple paper trays are installed, repeat steps 4 through 6 to unlock all of the trays.Figure : Unlock the tray -
Walk to the rear of the printer.Figure : Walk to the rear of the printer
-
Press the lever toward the rear of the printer to finish unlocking the paper tray.Figure : Unlock the feeder
-
Place all paper trays on the printer stand, and then place the printer on top of the paper tray.
caution:
HP recommends that two people move the printer.Figure : Place the paper trays and printer on the printer stand -
Open the door on the printer stand.Figure : Open the door on the printer stand
-
Press down on the lever to lock the printer stand.Figure : Lock the printer stand
-
Close the door on the printer stand.Figure : Close the door on the printer stand
-
Open the tray.Figure : Open the tray
-
Press down on the lever to lock the tray.
note:
If multiple paper trays are installed, repeat this step to lock all of the trays.Figure : Lock the tray -
Walk to the rear of the printer.Figure : Walk to the rear of the printer
-
Press the lever on the back of the printer stand toward the front of the printer.Figure : Lock the printer stand
-
Press the lever under the back handle toward the front of the printer to finish locking the tray and stand.Figure : Lock the feeder
-
Lock the wheels on the printer stand.Figure : Lock the wheels
-
Reconnect the power cable and the USB or network cable.For MFP models with fax: Connect the phone cord for the fax.Figure : Reconnect the cables
-
Press the Power button to turn on the printer.Figure : Turn on the printer