solution Contentsolution Content

HP Designjet T770 and T1200 Printer Series - Control access to the printer

Control access to the printer

From the Embedded Web Server, you can select Setup > Security to control access to the printer in various ways:
  • Specify separate administrator and guest passwords to control access to the Embedded Web Server
  • Enable or disable Ethernet and USB connections to the printer
  • Enable or disable various groups of front panel operations
note:
For more information, see the Embedded Web Server's online help.
If you forget the administrator password, you can delete the current password from the front panel: select the Connectivity menu icon , then Advanced > Embedded Web Server > Reset EWS access control.
Access to the Networking page is protected by a different password (the administrator's password). To reset the administrator's password, you need to reset the whole input/output configuration. Using the front panel, select the Connectivity menu icon , then select your connection method (e.g. Gigabit Ethernet), then Restore factory settings.
note:
This will reset the whole input/output configuration, the printer will reset to the DHCP configuration method and its IP address could change.