The following information describes how to load paper into Tray 3.
note:Do not open this tray while it is in use.
note:Do not adjust the paper guides tightly against the paper stack. Adjust them to the indentations or markings in the tray.
note:To prevent jams, adjust the paper guides to the correct size and do not overfill the tray. Be sure that the top of the stack is below the tray full indicator, as shown in the enlargement in the illustration.
note:If the tray is not adjusted correctly, an error message might display during printing or the paper might jam.
Paper type
|
Output
|
How to load paper
|
Letterhead or preprinted
|
1-sided printing
|
Face-down
Top edge at the front of the tray
![]() |
Letterhead or preprinted
|
2-sided printing
|
Face-up
Top edge at the front of the tray
![]() |