Use the printer control panel to configure the settings and copy the photo.
note:
The steps vary according to the type of control panel.
FutureSmart 3
|
|
FutureSmart 4
|
|
FutureSmart 3
-
From the Home screen on the printer control panel, select the Copy button.
-
Select the More Options button at the bottom of the screen.
-
Select the Optimize Text/Picture button.
-
Select the Photograph option, and then select OK.
-
Select the Start
button.
FutureSmart 4
-
From the Home screen on the printer control panel, select Copy.
-
Use either of the following methods to select settings:
-
Under Quick Sets and Defaults, select Load, and then select Photograph. Review the description and then select Load to proceed.
-
Select Options in the lower left corner of the screen, and then configure settings, such as Optimize Text/Picture and Image Adjustment. (Not all options apply to photos.) Select Done for each setting, if prompted.
-
Touch the right pane of the control panel screen to preview the copy. To discard the preview and begin again, select the Clear button (
).
-
To adjust the number of copies, touch the Copy Count field to the left of the Copy button. When the keypad displays, select the number of copies to make.
-
When the document is ready, select Copy to begin copying.