HP LaserJet Enterprise M604, M605, M606 - Select an output bin

The top output bin collects paper face-down, in the correct order. Use this bin for most print jobs, including transparencies. To use the top output bin, be sure that the rear output bin is closed. To avoid jams, do not open or close the rear output bin while the product is printing.

The product always prints to the rear output bin if it is open. Paper that is printed to this bin will exit face-up, with the last page on top (reverse order).

Printing from Tray 1 to the rear output bin provides the straightest path. Opening the rear output bin might improve performance with the following items:

• Envelopes
• Labels
• Small custom-size paper
• Postcards
• Paper heavier than 120 g/m2.

Opening the rear output bin makes the duplexer (if installed) and the top output bin unavailable. To avoid jams, do not open or close the rear output bin while the product is printing.

1. To open the rear output bin, grasp the handle at the top of the bin, and pull the bin down.
   Figure : Top output bin
   
2. Slide out the extension.
   Figure : Top output bin
   

The output bin on the optional stacker holds up to 500 sheets of 75 g/m2 paper. It accepts standard and custom paper sizes. Using the stacker increases the output capacity of the product to a total of 1,000 sheets. Jobs are sent first to the standard output bin, and then to the stacker bin.

The output bin on the optional stapler/stacker holds up to 500 sheets of 75 g/m2 paper. It accepts standard and custom paper sizes, but only Letter, Legal, and A4 sizes can be stapled. Using the stapler/stacker increases the output capacity of the product to a total of 1,000 sheets. Jobs that do not require stapling are sent first to the standard output bin, and then to the stacker bin.

To print to the optional stacker or optional stapler/stacker, select the option in the print driver.

note:

When a stapler/stacker is installed, the product automatically rotates the printed images 180° on all paper sizes, regardless of whether the job is stapled. Paper types that must be printed in the correct orientation, such as letterhead or prepunched paper, need to be loaded in a different direction.