HP LaserJet Enterprise MFP, HP OfficeJet Enterprise MFP, HP PageWide Enterprise MFP - Reduce or enlarge a copy image

Follow these steps if your printer has a FutureSmart 3 touchscreen control panel.

1. From the Home screen on the printer control panel, touch the Copy button.

2. Touch the Reduce/Enlarge option.

3. Touch one of the predefined percentages, or touch the Scaling field and enter a percentage, then touch the OK button.

   When copying from the document feeder, use a percentage between 25 and 200. When copying from the scanner glass, use a percentage between 25 and 400. You can also select these options:

   • Auto: The printer automatically scales the image to fit the paper size in the tray.

   • Auto Include Margins: The printer reduces the image slightly to fit the entire scanned image within the printable area on the page.

   Note:

   To reduce the image, select a scaling percentage that is less than 100. To enlarge the image, select a scaling percentage that is greater than 100.

4. Touch the Start button to begin copying.

Follow these steps if your printer has a FutureSmart 4 or 5 touchscreen control panel.

1. From the Home screen on the printer control panel, touch Copy.

2. Touch Options in the lower left corner, and then touch Reduce/Enlarge in the list of options.

3. Touch Automatic, or touch Manual and enter a percentage between 25 and 400, then touch Done.

   Note:

   To reduce the image, select a scaling percentage that is less than 100. To enlarge the image, select a scaling percentage that is greater than 100.

4. To adjust the number of copies, touch the box to the left of the Copy button.

   A touch keypad will display.

5. Enter the number of copies using the touch keypad, and then touch Copy.