hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP PageWide Enterprise Color 556, MFP 586 - Replace the ink-collection unit

The following information provides details about the ink-collection unit for the printer, and it includes instructions to replace it.

Introduction

The printer indicates when the ink-collection unit is nearly full and when it is completely full. When it is completely full, printing stops until the ink-collection unit is replaced.

Ink-collection unit part number

B5L04-67906

Ink-collection unit

Note:

The ink-collection unit is designed for a single use. Do not attempt to empty the ink-collection unit and reuse it. Doing so could lead to pigment being spilled inside the printer, which could result in reduced print quality. After use, return the ink-collection unit to HP’s Planet Partners program for recycling.

Open the left door

Follow these steps to open the left door.

Open the left door

Remove the ink-collection unit by pulling it out with both hands

Set the unit aside, upright, on a piece of paper to prevent spills.

CAUTION:

When pulling out the ink-collection unit, avoid making direct contact with the black cylinder to prevent pigment smear on skin or clothes.

Remove the ink-collection unit

Remove the new ink-collection unit from its packaging

Follow these steps to remove the new ink-collection unit from its packaging.

Remove the packing material

Install the ink-collection unit

Follow these steps to install the ink-collection unit.

Install the ink-collection unit

Close the left door

Follow these steps to close the left door.

Close the left door

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag South Africa

hp-detect-load-my-device-portlet

Actions
Loading...