
hp-support-head-portlet

- ${title}
hp-contact-secondary-navigation-portlet

- ${title}
hp-share-print-widget-portlet

- ${title}
hp-concentra-wrapper-portlet

- ${title}
HP PageWide Enterprise, HP PageWide Managed - Removal and replacement: Staple cartridge
Learn how to remove and replace the staple cartridge.
Mean time to repair: 5 minutes
Service level: Basic

Click here to visit the HP video library.
When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.
Before performing service
Turn the printer power off
-
Disconnect the power cable.
Warning:To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cable before attempting to service the printer.
Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts.
Part number |
Part description |
---|---|
J7Z09-67933 |
Staple cartridge |
Required tools
-
No special tools are needed to remove or install this assembly.
After performing service
Turn the printer power on
-
Connect the power cable.
-
Use the power switch to turn the power on.
Post service test
Send a (staple) print job to the printer and select the inline finisher as the output destination.
Remove the staple cartridge
Follow these steps to remove the staple cartridge.
Unpack the replacement assembly
Follow these steps to unpack the replacement assembly.
Install the staple cartridge
Follow these steps to install the staple cartridge.
hp-feedback-input-portlet

- ${title}
hp-feedback-banner-portlet

- ${title}
hp-country-locator-portlet

- ${title}

hp-detect-load-my-device-portlet

- ${title}
hp-hero-support-search

- ${title}