After installing the HP Jetdirect 2800w NFC & Wireless Direct Accessory, use the following steps to verify that your HP printer is ready to print using HP NFC.
For installation instructions, see the HP Jetdirect 2800w NFC & Wireless Direct Accessory Installation Guide.
-
Verify that the printer is in the Ready state.
-
To confirm that NFC and HP wireless direct printing are enabled on your printer, print a configuration page from the control panel. If a page titled Wireless is included, NFC and HP wireless direct printing are enabled.
-
Ensure that the latest version of HP ePrint Software (version 4.5 or newer) is installed on your mobile device. If you need to update:
-
Go to: www.hp.com/go/eprintsoftware.
-
From the HP ePrint Software page, click Download software.
-
Select your operating system, and then click Download from the Software - ePrint table.
-
Save the file to your system. Then, double-click the file and follow the instructions.
-
-
From a mobile device or a computer, verify that wireless capability is enabled (the Wi-Fi radio is on). This control is typically found in the Settings menu.
note:
Disable existing wireless connections (WLAN or Internet).When printing, closely align (within 1 inch (2.5 mm)) or touch the NFC icon of the mobile device and the NFC icon of the HP Jetdirect 2800w NFC & Wireless Direct Accessory. Hold the mobile device and the accessory together for at least one full second to ensure a connection.The HP ePrint Software displays the NFC tab or tile if the NFC antennas are correctly positioned and the compatible NFC hardware is installed and enabled in the mobile device.