hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on an HP computer or printer – Click here

hp-concentra-wrapper-portlet

Actions
Loading...

HP EliteBook 8530w Mobile Workstation - Removing and Replacing the Fan

Introduction

This document is provided to assist in removing and replacing the Fan for the HP EliteBook 8530w Mobile Workstation.

Minimum skill level

The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.

Tools required

T8-7mm screwdriver

Parts required

note:
Part numbers are subject to change.
The replacement part number will vary depending on the Fan that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.
Description
Part Number
Requires Return
Fan assembly - For use on computer models with Quad Core processors
495080-001 (Modified)
No
note:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.

Summary of instructions

To view a video demonstrating the procedure for removing the Fan, click on the link below. Or use the product video listing on the HP Services Media Library, then select Fan from the menu on the upper left hand side of the screen.
Click here to view the Fan removal video (Right-click on the video link above to open in a new window/tab).

Fan removal

  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      caution:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. note:
    On the extreme edition, the fan exhaust opening is wider than on the non-extreme edition. Otherwise, the removal and replacement procedures are the same for both editions. Be sure to order and install the fan for the appropriate edition.
  3. Disconnect the fan cable from the system board.
  4. Remove the three T8-7mm screws that secure the fan to the base enclosure.
  5. Lift and remove the fan.

Fan replacement

  1. Toe the fan into the base enclosure.
  2. Replace the three T8-7mm screws that secure the fan to the base enclosure.
  3. Reconnect the fan cable to the system board.

Parts return


hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag South Africa

hp-detect-load-my-device-portlet

Actions
Loading...