solution Contentsolution Content

HP Designjet T1100 and T1120 MFP Series Products - Change the Default Administrator Password

Change the default administrator password

The administrator password can be used to protect the setting of system specific options such as interface language, network parameters, accounting i.e., key administrative settings. Your system comes with a default Administrator password - "hpinvent" (all low-case letters).
If the default Administrator password is equal to "hpinvent" i.e., never changed or has been reset to its original value, password protection will not be applied to the key administrative settings and they will remain open for editing by all users.
If the default Administrator password is changed to something different than the default password "hpinvent", , the system's key administrative settings will be protected and users will be prompted for the new password before they can enter the options for changing them.
If there are many who share the system, it is recommended that the default password is changed by the system's administrator when the system is setup the first time.
  1. Select the Setup tab.
  2. Select Options, System.
  3. Select the Advanced button.
  4. Press the Set/Change Password button.
  5. Enter the new administrator password. You will be asked to confirm the new administrator password.
  6. Click OK when finished. The new administrator password is effective immediately..
  7. You can turn off protection again by resetting the administrator password to the default password "hpinvent".