hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Scanjet 4850 and 4890 Photo Scanners - Setting Up the Hardware

Introduction

This document contains a procedure for setting up the scanner hardware.

Set up the scanner hardware

  1. Connect the transparent materials adapter (TMA) cable to the port on the back of the scanner.
    Figure : Scanner setup
  2. Connect the power supply to the scanner, and then plug the power supply into a surge protector or grounded wall outlet.
  3. Turn on the power switch.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag South Africa

hp-detect-load-my-device-portlet

Actions
Loading...