hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

Digital Projector - Mounting the Projector on a Tripod for the Compaq Microportable Projector 3800

The MP 3800 projector includes an industry-standard tripod mount on the bottom of the projector. This enables the projector to be mounted on tripods readily available at camera and other electronic stores.
  caution:
The tripod should be capable of supporting a weight of at least 5 lb. Refer to the tripod manual for this information.
  caution:
Do not over-tighten the tripod mounting screw. Doing so could strip the screw and cause the projector to fall off of the tripod.
Mounting the projector on a tripod:
  1. Remove the tripod-mounting block from the tripod.
  2. If there is a guide pin on the tripod-mounting block, align it with the guide pinhole on the bottom of the projector.
  3. Attach the tripod-mounting block to the tripod mount hole on the bottom of the projector.
4.Attach the projector and tripod-mounting block to the tripod according to the tripod manufacturer instructions.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag South Africa

hp-detect-load-my-device-portlet

Actions
Loading...