Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

HP PCs - Connecting a Bluetooth device (Windows)

This document is for HP computers with Windows and Bluetooth connectivity.

Connecting a Bluetooth device to an HP computer

Follow these steps to connect your Bluetooth enabled device to a Windows 11 or Windows 10 computer.

Use the Bluetooth settings to establish a connection with your device.

Note:

The following steps are for Windows 11. If you have a different version of Windows, the steps should be similar.

Make sure the device you want to connect to is discoverable and within range of your computer.

If the device is a headset, make sure it is on and set to Bluetooth. If the device is an Apple iOS or Android mobile device, go to the Settings menu and make sure Bluetooth is enabled and discoverable.
In Windows, search for and open Bluetooth and other devices settings.

If Bluetooth & other devices does not return in the search, your computer might not support Bluetooth.
On the Bluetooth & devices tab, toggle the Bluetooth setting to On.
Click Add device to start searching for the device.
Click Bluetooth as the kind of device you want to add.
Select the Bluetooth device you want to add from the list.
If prompted, enter the PIN, and then click Connect. If a PIN does not display, enter 0000, a commonly used default PIN for many Bluetooth devices.
Immediately check for an authorization message on the device you are connecting to and confirm the message or allow access.
Follow the on-screen instructions on the computer and the device to complete the pairing process.

A confirmation message displays when the devices are paired.

Note:
If an authentication error displays, too much time has lapsed. Move the devices closer, and then try to pair them again.