hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

Removal and replacement: Control-panel assembly (M806, M855)

This document provides the procedures to remove and replace the control panel for the HP LaserJet Enterprise M806 and HP Color LaserJet Enterprise Flow M855.

Mean time to repair: 5 minutes

Service level: Basic

Before performing service

Turn the printer power off

  • Disconnect the power cable.

    Warning:

    To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cord before attempting to service the printer.

Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts.

Part information

Control panel kit part number

5851-5950

Control panel kit with instruction guide

Required tools

  • No special tools are required to install this kit.

After performing service

Turn the printer power on

  • Connect the power cable.

  • Use the power switch to turn the power on.

Post service test

Print a configuration page to make sure that the printer is functioning correctly.

Remove the control-panel assembly (M806)

Follow these steps to remove the control-panel assembly (M806).

Note:

These steps apply only to the M806 models. For the M830 models, skip to the next step.

  1. Tilt the screen up.

    Tilt the control panel up

    Tilt the control panel up
  2. Release one tab.

    Release one tab

    Release one tab
  3. Remove the cover.

    Remove the cover

    Remove the cover
  4. Rotate one blue locking latch to release it.

    Release the latch

    Release the latch
  5. Rotate the back of the control panel up and away from the product.

    Rotate the control panel up

    Rotate the control panel up
  6. Lift the control-panel assembly up and off of the product.

    CAUTION:

    The control panel is still attached to the product by the control-panel cables.

    Lift the control-panel assembly up

    Lift the control-panel assembly up
  7. Tilt the control panel forward to gain access to the control-panel connectors.

    Tilt the control panel forward

    Tilt the control panel forward
  8. Remove one screw (callout 1), and then release one ground wire (callout 2).

    Remove one screw to release one ground wire

    Remove one screw to release one ground wire
  9. Disconnect two USB cables (callout 1) , and then disconnect one wire harness (callout 2).

    Disconnect the USB cables and wire harness

    Disconnect the USB cables and wire harness
  10. Remove the control panel.

    Tip:

    Reverse the removal steps to install the assembly.

    Remove the control panel

    Remove the control panel

Unpack the replacement assembly

Follow these steps to unpack the replacement assembly.

  1. Dispose of the defective part.

    Note:

    HP recommends responsible disposal of the defective part.

    http://www8.hp.com/us/en/hp-information/environment/product-recycling.html

  2. Unpack the replacement part from the packaging.

    CAUTION:

    Some parts are sensitive to electrostatic discharge (ESD). Always perform service work at an ESD-protected workstation or mat. If an ESD workstation or mat is not available, touch the sheet-metal chassis to provide a static ground before touching an ESD-sensitive assembly. Protect the ESD-sensitive assemblies by placing them in ESD pouches when they are out of the printer.

    Important:

    Make sure that all of the shipping materials (for example shipping tape) are removed from the replacement part prior to installation.

    Note:

    If the replacement part is a roller or pad, avoid touching the spongy part of it. Skin oils on the roller or pad can cause paper pickup and/or print-quality problems. HP recommends using disposable gloves when handling rollers or pads or washing your hands before touching rollers or pads.

  3. To install an assembly, reverse the removal steps.

    Note:

    When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.

Install the control-panel assembly

Follow these steps to install the control-panel assembly.

  1. Connect two USB cables (callout 1) , and then connect one wire harness (callout 2) to the replacement control panel.

    Connect the USB cables and the wire harness

    Connect the USB cables and the wire harness
  2. Make sure that the USB cables (callout 1) are connected to the correct connectors. Refer to the label (callout 2) next to the connectors.

    Check the USB cables connectors

    Check the USB cables connectors
  3. Use one screw (callout 1) to fasten the ground wire (callout 2) to the control panel.

    Fasten the ground wire to the control panel

    Fasten the ground wire to the control panel
  4. Insert the front edge of the control panel into the control-panel cavity.

    Place the control panel on the product

    Place the control panel on the product
  5. Make sure that the wire harness (callout 1) is completely inside the control- panel cavity.

    Check the wire harness

    Check the wire harness
  6. Rotate one blue locking latch to close it.

    Close the latch

    Close the latch
  7. Align the tabs at the back of the cover (callout 1) with the slots at the back of the control-panel assembly (callout 2).

    Place the cover on the product

    Place the cover on the product
  8. Close the cover. Make sure that the tab on the cover snaps closed.

    Close the cover

    Close the cover

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Vietnam

hp-detect-load-my-device-portlet

Actions
Loading...