Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

HP Color Laser 150 Printers - Loading Paper, Envelopes

This document is for HP Color Laser 150a and 150nw printers.

Learn how to load paper or envelopes into the input tray.

Load plain paper

Load a stack of paper into the input tray.

Pull out the input tray.
Open the paper cover.
To switch between U.S. Letter and A4-size paper or load legal-size paper, extend the input tray by pressing the latch and pulling out the front of the tray.
Turn over the input tray, grasp the lever, and then rotate the lever clockwise for letter or counterclockwise for A4.
Turn the input tray right-side up, and then push in the extended tray until it snaps into place.

note:
Leave the input tray extended for legal-size paper.
Slide out the paper guides as far as possible.
Load paper into the tray print side up with the top edge towards the printer. To prevent paper jams, make sure the stack is below the paper fill guide.
Slide in the paper guides until they touch the edge of the stack of paper.
Close the paper cover, and then push in the input tray.
Lift the output support to open it.

note:
Before printing or copying, select the correct tray, paper size, and paper type settings from the control panel or computer.

Load envelopes

Load several envelopes in the main input tray or a single envelope in the priority feed slot.

Load envelopes in the main input tray to print addresses for the recipient and sender.

Pull out the input tray.
Open the paper cover.
Extend or shorten the input tray by pressing the latch and pulling out or pushing in the front of the tray, and then slide out the paper guides as far as possible.
Load envelopes into the input tray. To prevent paper jams, make sure the stack is below the paper fill guide.
Slide in the paper guides until they touch the edge of the stack of envelopes.
Close the paper cover, and then push in the input tray.
Lift the output support to open it.

note:
Before printing or copying, select the correct tray, paper size, and paper type settings from the control panel or computer.

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Flag

Vietnam

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "ProBook 440 G3 bios update"