Use the following procedure to check for paper in all possible jam locations related to the optional 550-sheet paper feeders. When a jam occurs, the control panel displays an animation that assists in clearing the jam.
-
Open the lower-right door.Figure : Open the lower-right door
-
Gently pull out any jammed paper.Figure : Remove the jammed paper
-
Pull the tray completely out of the printer by pulling and lifting it up slightly.Figure : Remove the tray
-
Remove any jammed or damaged sheets of paper. Verify that the tray is not overfilled and that the paper guides are adjusted correctly.Figure : Remove the jammed paper
-
Remove any paper from the feed rollers inside the printer. First pull the paper to the left to release it, and then pull it forward to remove it.Figure : Remove the jammed paper
-
Close the lower-right door.Figure : Close the lower-right door
-
Reinsert and close the tray.Figure : Close the tray
-
Open the right door.Figure : Open the right door
-
Gently pull out any jammed paper from the pick up area.Figure : Remove the jammed paper
-
Close the transfer assembly.Figure : Close the transfer assembly
-
Push down on the green levers to release the jam-access cover.Figure : Press down on the green levers
-
Gently pull out any jammed paper. If the paper tears, make sure to remove all remnants.Figure : Remove the jammed paper
-
Close the jam-access cover, and then lower the transfer assembly.Figure : Close the jam-access cover
-
Close the right door.Figure : Close the right door