hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    We are upgrading our website

    If you experience errors during this time, please try again later. 

hp-concentra-wrapper-portlet

Actions
Loading...

HP Split 13 m-000 x2 Notebook PCs - Default Setup Utility (BIOS) Settings Are Incorrect

The default Setup Utility (BIOS) settings for Secure Boot and Platform Key are incorrect. Secure Boot is Disabled and the Platform Key is Not Enrolled.
Information in this document applies to the following:
Computers:
  • HP Split 13-m000 x2 PC
Serial Number Range:
  • xxx326xxxx - xxx329xxxx
To resolve this issue, complete the following procedure:
  1. Boot into the Setup Utility (BIOS).
  2. Select System Configuration from the top menu. Under Boot Options, select Load HP Factory Default Keys.

  3. Select Yes.

  4. Press f10 to save the setting. Reboot into the Setup Utility (BIOS).
  5. Select System Configuration from the top menu. Under Boot Options, Select Secure Boot. Change Disabled to Enabled. Press f10 to save the setting.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Vietnam

hp-detect-load-my-device-portlet

Actions
Loading...