HP Compaq dc7700 Convertible Minitower PC - Removing and Replacing the Hard drive

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "ProBook 440 G3 bios update"

hp-share-print-widget-portlet

Actions

Information

Information regarding recent vulnerabilities
HP is aware of the recent vulnerabilities commonly referred to as "Spectre" and "Meltdown". HP has published a security bulletin with patches for these issues and a list of impacted systems. We will continue to update the bulletin as more information becomes available and encourage customers to check the bulletin frequently.

hp-concentra-wrapper-portlet

Actions

HP Compaq dc7700 Convertible Minitower PC - Removing and Replacing the Hard drive

Introduction

Minimum skill level

Parts required

Summary of instructions

Parts return

Introduction

This document is provided to assist in removing and replacing the Hard drive for the HP Compaq dc7700 Convertible Minitower PC.

Minimum skill level

The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.

Parts required

note:

Part numbers are subject to change.

The replacement part number will vary depending on the Hard drive that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.

Description	Part Number	Requires Return
80 GB SATA 2 (3 Gb/s) hard drive - 7,200 RPM, 3.5 inches form factor, 1 inch high	432392-001 (Modified)	Yes
160 GB SATA 2 (3 Gb/s) hard drive - 7,200 RPM, 3.5 inches form factor, 1 inch high	432393-001 (Modified)	Yes
250 GB SATA 2 (3 Gb/s) hard drive - 7,200 RPM, 3.5 inches form factor, 1 inch high	432394-001 (Modified)	Yes

note:

For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.

Summary of instructions

To view a video demonstrating the procedure for removing the Hard drive, click on the link below. Or use the product video listing on the HP Services Media Library then select Hard drive from the menu on the upper left hand side of the screen.

Click here to view the Hard drive removal video (right-click on the link to open in a new window/tab).

Hard drive removal

Review the safety considerations before performing the steps listed below by clicking on the following link:

Click here to view the precautions.

caution:

Failure to comply with the precautions could result in damage to your product or loss of data.
Remove the Access panel. Click here for instructions on how to remove the access panel.

note:

This system supports SATA drives only. You do not have to select a cable setting.
Disconnect the data and power cables from the drive.
Pull out on the green drive release latch and slide the drive out of the drive cage.

note:

If the replacement drive does not include guide screws, remove and reuse the screws from this drive.

Hard drive replacement

Align the guide screws on the drive with the guide slots in the drive bay and push the drive into the bay until it snaps into place.
Connect the power and data cables to the drive.
Replace the Access panel. Click here for instructions on how to replace the access panel.

Parts return

If your part requires return then click on the appropriate link below:

Click here for the defective parts return procedure for US.

Click here for the defective parts return procedure for Europe.