hp-support-head-portlet

Acciones
Cargando...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Acciones
Cargando...

hp-share-print-widget-portlet

Acciones
Cargando...
  • Información

    Solucione errores intermitentes en la cola de impresión/con el spooler de impresión que podrían causar fallos en los trabajos de impresión tras una actualización de Windows. Haga clic aquí

    Información
    Corrija errores en Win 10

    Resuelva problemas de actualización  de Windows 10  en un PC o impresora HP – haga clic aquí

hp-concentra-wrapper-portlet

Acciones
Cargando...

HP Compaq 6910p Notebook PC - Removing and Replacing the Optical Drive

Introduction

This document is provided to assist in removing and replacing the Optical Drive for the HP Compaq 6910p Notebook PC.

Minimum skill level

The End-User should possess product-specific knowledge and technical skill on how to service the system, and have familiarity with the operating system.

Tools required

  • P0 Phillips-head screw driver

Parts required

nota:
Part numbers are subject to change.
The replacement part number will vary depending on the Optical Drive that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.
Description
Part Number
Requires Return
DVD±RW and CD-RW Double-Layer Combo Drive
446409-001
Yes
DVD/CD-RW Combo Drive
446410-001
Yes
DVD-ROM Drive
446408-001
Yes
nota:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.

Summary of instructions

To view a video demonstrating the procedure for removing the Optical Drive, click on the link below. Or use the product video listing on the HP Services Media Library, then select Optical Drive from the menu on the upper left hand side of the screen.
Click here to view the Optical Drive removal video (right-click on the link to open in a new window/tab).

Optical drive removal

  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      atención:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Remove the 4 mm P0 Phillips-head screw that secures the optical drive to the base enclosure.
    nota:
    Screw location is indicated by the appropriate icon.
  3. Press and release the eject icon on the end of the optical drive front bezel to partially eject the optical drive.
  4. Grasp the sides and pull the optical drive out of the base enclosure.

Optical drive replacement

  1. Insert the optical drive into the base enclosure until the connector is seated.
  2. Replace the 4 mm P0 Phillips-head screw that secures the optical drive to the base enclosure.

Parts return


hp-feedback-input-portlet

Acciones
Cargando...

hp-feedback-banner-portlet

Acciones
Cargando...

hp-country-locator-portlet

Acciones
Cargando...
País/región: Flag Venezuela

hp-detect-load-my-device-portlet

Acciones
Cargando...