HP Desktop PCs - motherboard specifications, Basswood

Figure : Basswood motherboard top view

Motherboard description

HP name: Basswood
SSID: 8399

Form Factor

uATX
Dimensions: 24.0x24.0 cm (9.4x9.4 in)

Chipset

AMD Promontory2

Processor upgrade information

TDP: up to 65 W
Socket type: AM4

Motherboard supports the following processor upgrades:

Processor	TDP
AMD Ryzen7-1700 (Summit Ridge) 3.0 GHz, 8 cores/16 threads (Pavilion Power chassis only)	65 W
AMD Ryzen5-1600 (Summit Ridge) 3.2 GHz, 6 cores/12 threads	65 W
AMD Ryzen5-1400 (Summit Ridge) 3.2 GHz, 4 cores/8 threads	65 W
AMD Ryzen3-1200 (Summit Ridge) 3.1 GHz, 4 cores/4 threads	65 W

Memory upgrade information

Dual channel (1 DIMM per channel) memory architecture
Two DDR4 UDIMM (288-pin) sockets
Supports PC4-19200 (DRR4-2400)
Supports 4 GB and 8 GB DDR4 UDIMMs
Supports up to 4 GB on 32-bit systems

note:
32-bit systems cannot address a full 4.0 GB of memory.
Supports up to 16 GB (unbuffered) on 64-bit computers

note:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

Video

No integrated graphics

The Basswood motherboard does not support integrated graphics.

Audio

Integrated audio

Audio Codec: ALC3863-CG
High Definition (Azalia) 5.1 channel audio support

note:
The motherboard supports 5.1 surround sound. If the computer does not have the required audio jacks for a 5.1 configuration, additional hardware is required to use 5.1 surround sound.
Audio jack presence detection

note:
An internal speaker is not included with integrated audio. External speakers or headphones are required to hear sound.

note:
Integrated audio is not available if a sound card is installed.

Network

LAN: 1000BASE-T

Technology: Realtek RTL8161GSH
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: 1000BASE-T Ethernet

Expansion Slots

note:
The configuration might vary depending on your model.

One PCIe x16 slot
One PCIe x1 slot
One M.2 socket 1, key A
One M.2 socket 3, key M

I/O Ports and Jumpers

Back I/O ports

note:
The configuration might vary depending on your model (for example, if a dedicated graphics card is included). Any modifications or upgrades might change the configuration, port accessibility, and port functionality.

Figure : Basswood back I/O panel

USB 2.0: 2

LAN (Ethernet)

HDMI out: 2

USB 3.0: 2

Audio: Line in

Audio: Line out

Audio: Microphone

Jumpers

Jumper on pins 1 and 3: CMOS jumper in default position
Jumper on pins 2 and 4: Password jumper in default position
Jumper on pins 3 and 5: Clear CMOS
Jumper on pins 4 and 6: Clear password

Figure : Basswood pins and jumpers