solution Contentsolution Content

HP Designjet 130 and 130nr Printers - Product Specifications

Product model numbers

  • HP Designjet 130 - C7791C
  • HP Designjet 130nr - C7791D
Figure : 130 Series

Technical specifications

Print technology

HP Thermal Inkjet

Print technology resolution

HP Color Layering Technology, PhotoREt IV

Print resolution color

Up to 2400 x 1200 dpi

HP Professional Color technologies

Automatic Color Calibration, Automatic Pantone Calibration, Offset simulation and CMYKplus

Lightfastness

Approximately 70 years1
1 Preliminary results from tests conducted by Wilhelm Imaging Research, Inc. indicate that prints made with HP No. 85 ink cartridges and HP Premium Plus Photo and Proofing Gloss paper may be displayed indoors under glass for approximately 70 years before noticeable fading and staining will occur.

Ink cartridge colors

Black, cyan, magenta, yellow, light cyan, light magenta

Print speed (using N5 file)

  • B/A3-size: Up to 4 min/page (Normal, Glossy)
  • B/A3-size: Up to 6 min/page (Best, Glossy)
  • D/A1-size: Up to 11.9 min/page (Normal, Glossy)
  • D/A1-size: Up to 17.5 min/page (Best, Glossy)

Print margins

  • Top (A3) 0.2 inch (5 mm)
  • Bottom (A3) 0.47 inch (12 mm) (cut sheet), 0.2 inch (5mm) (roll**)
  • Left (A3) 0.2 inch (5 mm)
  • Right (A3) 0.2 inch (5 mm)

Media sizes

Letter, legal, tabloid, executive, C, D, C+, D+, envelopes, banners (A1, A1+, A2, A3, A4, B2, B3, B4, A2 metric oversize, A/B/C/D (English architectural), envelopes, banners)

Roll

  • Core diameter: 2 inch (5.08 cm)
  • External diameter: 3.9 inch (10.9 cm)
  • Max Weight: 7lb (3.2 kg)

Media thickness (by paper path)

HP Designjet 130
  • Tray 1 - Up to 0.008 inch (0.2 mm); envelopes: up to 0.015 inch (0.4 mm)
  • Rear tray - Up to 0.015 inch (0.4 mm)
  • Manual sheet feed - Up to 0.008 inch (0.2 mm)
130nr
  • Tray 1 - Up to 0.008 inch (0.2 mm); envelopes: up to 0.015 inch (0.4 mm)
  • Rear tray - up to 0.015 inch (0.4 mm)
  • Manual sheet feed - up to 0.008 inch (0.2 mm)
  • Roll media - up to 0.008 inch (0.2 mm)

Media weights (by paper path)

130
  • Tray 1 - 17 to 40 lb (65 to 150 g/m2)
  • Manual single-sheet feed - 17 to 40 lb (65 to 150 g/m2)
  • Rear path - Up to 80 lb (300 g/m2)
130nr
  • Tray 1 - 17 to 40 lb (65 to 150 g/m2)
  • Manual single-sheet feed - 17 to 40 lb (65 to 150 g/m2)
  • Rear path - Up to 80 lb (300 g/m2)
  • Roll feed - 17 to 40 lb (65 to 150 g/m2)

Minimum system requirements

Windows:
  • Microsoft Windows (98) - Pentium I, 133 MHz,128 MB RAM, 300 MB available hard disk space
  • Microsoft Windows NT - Pentium II, 300 MHz, 128 MB RAM, 400 MB available hard disk space
  • Microsoft Windows (2000, 2003) - Pentium II, 300 MHz, 128 MB RAM, 400 MB available hard disk space
  • Microsoft Windows XP - Pentium III, 733 MHz, 256 MB RAM, 400 MB available hard disk
Macintosh:
  • iMac G3, G4, G5 dual processor, iBook, PowerBook, eMac
  • Mac (OS 9.1, OS X v 10.1.5), 128 MB RAM, 100 MB available hard disk space

Recommended system requirements

Windows:
  • Microsoft Windows (Me) - Pentium II, 300 MHz, 128 MB RAM, 1 GB available hard disk space
  • Microsoft Windows NT - Pentium III, 733 MHz, 128 MB RAM, 2 GB available hard disk space
  • Microsoft Windows 2000 - Pentium III, 733 MHz, 256 MB RAM, 2 GB available hard disk space
  • Microsoft Windows XP - Pentium IV, 1 GHz, 256 MB RAM, 2 GB available hard disk space
Macintosh:
  • Dual 1 GHz PowerPC G4, 512 MB RAM

Memory

64 MB

Connectivity

  • 130 Standard - USB 1.1 (USB 2.0 compliant), Centronics parallel IEEE-1284 (ECP compliant), one EIO slot
  • 130 Optional - HP Jetdirect 615n, 680n, 610n, 600n, 175x, 310x, 380x
  • 130nr Standard - USB 1.1 (USB 2.0 compliant), Centronics parallel IEEE-1284 (ECP compliant), 1 EIO slot, HP Jetdirect 615n
note:
Windows 95 and 98 operating systems do not support a USB connection. Windows 98SE (Second Edition) and higher is necessary to obtain a USB connection to the printer.

Drivers (included)

Raster driver for Mac OS (9.x, X.1, X.2, X.3), PCL 3 GUI Windows driver, Microsoft Windows drivers (98, Me, NT 4.0, 2000, XP) including support for AutoCAD 2000, USB and ECP drivers

Print languages

  • Standard - PCL 3-GUI RGB 24-bit Contone
  • Optional - Adobe PostScript 3 via software RIP

Product weight

  • 130 - 48.5 lb (22 kg)
  • 130nr - 50.7 lb (23 kg)

Dimensions (h x d x w)

  • 130 - 8.7 x 16.3 x 41.3 inches (220 x 415 x 1050 mm)
  • 130nr - 8.7 x 21 x 41.3 inches (220 x 535 x 1050 mm)

Power consumption

65 watts (maximum), 22 watts (standby)

Power supply

Input voltage 100 to 240 VAC (+/- 10%) auto ranging, 50/60 Hz (+/- 3 Hz), 2 amp maximum

Electromagnetic compatibility

Compliance for Class B products, Class A when connected to LANs, EU (EMC Directive), USA (FCC rules), Canada (DoC), Australia (ACA), New Zealand (MoC), China (CCC), Japan (VCCI), Class A for Korea (MIC), Taiwan (BSMI)

Safety

IC 950-compliant, EU LVD and EN60950 compliant, CSA certified for US and Canada, Mexico NOM-1-NYCE, Argentina IRAM, China CCC, Singapore PSB, Russia VNIIS, Poland ELTEST, Korea KETL

Accessories and supplies

HP Designjet 130:
  • HP Designjet Printer Stand and Media Bin (Q1246A). Not available in AP with the exception of Japan.
  • HP Designjet 110/120 series Spindle (Q1264A)
  • HP Designjet 110/120 Automatic Roll Feed (Q1247A)
  • HP Jetdirect 615n LAN card (J6057A)
  • HP Software RIP for HP Designjet 130 (Q5672A)
  • EFI Designer Edition 4.0 for HP XL (Q6643A) (Japan - Q6644A )
HP Designjet 130nr:
  • HP Designjet Printer Stand and Media Bin (Q1246A)
  • HP Designjet 110/120 series Spindle (Q1264A)
  • HP Software RIP for HP Designjet 130 (Q5672A)
  • EFI Designer Edition 4.0 for HP XL (Q6643A) (Japan - Q6644A )
Ink supplies
Description
HP part number
HP 85 cyan printhead
C9420A
HP 85 magenta printhead
C9421A
HP 85 yellow printhead
C9422A
HP 85 light cyan printhead
C9423A
HP 85 light magenta printhead
C9424A
HP 84 black printhead
C5019A
HP 85 cyan ink cartridge
C9425A
HP 85 magenta ink cartridge
C9426A
HP 85 yellow ink cartridge
C9427A
HP 85 light cyan ink cartridge
C9428A
HP 85 light magenta ink cartridge
C9429A
HP 84 black ink cartridge
C5016A

HP Care pack information

HP Designjet 130 and 130nr
Care pack description
HP part number
HP Care Pack Next Day Exchange, three years (EMEA1, NA2, LAR3, JP4, Australia, New Zealand)
U3423A
HP Care Pack Next Day Exchange, three years (EMEA, NA, LAR, JP, Australia, New Zealand)
U3423E
HP Care Pack Next Day Onsite Response, three years (Japan, AP except Australia, New Zealand)
U3477A
HP Care Pack Next Day Onsite Response, three years (Japan, AP except Australia, New Zealand)
U3477E
1Europe, 2North America, 3Latin America, 4Japan

Parts ordering information

Click here to order parts, accessories, or HP Care packs from the small and medium online store at http://www.smb.compaq.com/home.asp?oi=E9CED&BEID=19701&SBLID=.