HP printer setup (HP Print for Chrome)

Check the printer connection to the network, or manually add it to HP Print for Chrome with the IP address.

1. Check the printer network connection status.

   • Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.

   • Printers without a touchscreen control panel: Press the Wireless and Information buttons at the same time, or press the Wireless and Start Copy Black buttons at the same time. A Wireless Test Report prints with the network connection status.

   The printer connection status should be Connected or Ready. If it is not, continue with these steps to connect your printer to the network.

2. Connect the printer to the network.

   • Printers with a touchscreen control panel: Open the Setup, Network, or Wireless menu, select Wireless Setup Wizard, and then follow the instructions to connect the printer to your network.

   • Printers without a touchscreen control panel: Press and hold the Wireless and Cancel buttons at the same time until the Power light blinks, and then wait for the Wireless light to blink. Within two hours, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The Wireless light on the printer stops blinking when the connection completes.

   • HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wireless button on the rear of the printer for five seconds until the Edge lighting flashes blue or purple. Within two hours, press and hold the WPS button on the router until the connection process begins. The Wireless light on the printer stops blinking when the connection completes.

   If the printer is connected but is still not listed as a destination, continue with these steps to connect with the printer IP address.

3. Click the browser Menu icon , click Settings, and then click Extensions.

4. In the HP Print for Chrome box, click Details.

5. Click Extension options.

6. In the upper right corner, click Add printers by IP address, and then follow the instructions to add the printer.

Find the printer IP address on a Network Configuration page.

1. Print a Wireless Network Test Results or Network Configuration report.

   • Inkjet printers with a control panel menu: Open the Wireless, Network Settings, or Setup menu to locate the list of available reports.

   • Most inkjet printers without a control panel menu: Press the Wireless and Information buttons at the same time, or press the Wireless and Start Copy Black buttons at the same time.

   • LaserJet printers: Press and hold the Wireless button for 10 seconds or until the Ready light blinks, or go to the Wireless menu and select Wireless Network Test.

   • Laser NS and Neverstop Laser printers: Press and hold the Resume and Wireless buttons for 3 seconds.

   • DeskJet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Touch and hold the Information button until all control panel buttons light up, and then touch the Information and Resume buttons at the same time.

2. Find the printer IP address.

   

Remove a printer from the list of destinations through your computer printers list.

1. From the Print window In Chrome, click the Destinations drop down menu.

2. Click See more... at the bottom of the pop-up menu.

3. In the Select a destination window, click Manage to view and remove any unwanted printers.

From settings in Chrome, you can enable, disable, or remove the HP Print for Chrome app.

1. In a Chrome browser, type chrome;//extensions in the address bar, and then press Enter.

2. In the list of Chrome extensions that displays, locate HP Print for Chrome.

   • To enable or disable the app, click the On/Off toggle. White is disabled, blue is enabled.

   • To remove the app, click Remove, and then click Remove to confirm.