The printer's various functions are controlled by software that resides in the printer, also known as firmware. From time to time, firmware updates from HP become available. These updates increase the printer's functionality and enhance its features. Firmware updates can be downloaded from the Internet and installed in your printer in the following ways, use the method that you find most convenient:
hp-support-head-portlet
Actions
- ${title}
Loading...
HP Customer Support - Knowledge Base
hp-contact-secondary-navigation-portlet
Actions
- ${title}
Loading...
hp-share-print-widget-portlet
Actions
- ${title}
Loading...
hp-concentra-wrapper-portlet
Actions
- ${title}
Loading...
HP DesignJet T210, T230, T250, T630, T650 and Studio - Firmware Upgrade
Introduction
Option 1 – Automatic Firmware Upgrade (internet connection required)
From the printer’s front panel
-
On the printer’s front panel tap
then Printer Maintenance. -
Tap Update the printer, then Check Now to check whether new firmware is available.
-
To enable the printer to automatically download and install firmware updates, turn On the Auto Update from the Printer Update Options screen.
-
-
If new firmware is available, you will be given the opportunity to download and install it.
From the Embedded Web Server
-
On a printer with an internet connection, swipe down the top bar on the printer’s front panel and tap Info to check its IP address.
-
Access the printer’s Embedded Web Server by typing the printer’s IP into your web browser.
-
In the Embedded Web Server, select the Tools tab, then Printer Updates > Firmware Updates.
-
Click Check Now to check whether new firmware is available.
-
To enable the printer to automatically download and install firmware updates, check the Install updates automatically option in Printer Update Options and click Apply.
-
-
If new firmware is available, you will be given the opportunity to download and install it.
Option 2 – HP DesignJet Utility (Using the firmware file downloaded from hp.com)
-
Download the firmware file found under the firmware tab in the printer support page:
-
Launch the HP DesignJet Utility and select your printer.
-
Select the Admin tab.
-
Click the Select File… button to browse to the firmware file that you just downloaded.
-
Click the Upload File button and follow the instructions.
Legal Disclaimer
© 2021 HP Development Company, L.P. The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Additional support options
{{#each this}}
{{#if (eq ../this.length 3)}}
{{else if (eq ../this.length 2)}}
{{else}}
{{/if}}
{{/each}}
hp-feedback-input-portlet
Actions
- ${title}
Loading...
hp-feedback-banner-portlet
Actions
- ${title}
Loading...
hp-country-locator-portlet
Actions
- ${title}
Loading...
Country/Region:
United States
United States
hp-detect-load-my-device-portlet
Actions
- ${title}
Loading...
hp-hero-support-search
Actions
- ${title}
Loading...
