hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP ENVY 32-a0xxx All-in-One PCs - Using the On-Screen Display Menu

This document is for HP ENVY All-in-One 32-a0xxx PCs.
Use the on-screen display (OSD) menu to adjust screen image, audio, and power options.

Navigate the OSD menu

Use the OSD controller to navigate and adjust settings in the OSD menu. The OSD controller is located on the bottom edge of the monitor.
OSD controller on the bottom right edge of the monitor
  1. Press the OSD controller button to view the main toggle diagram.
    Main toggle diagram
  2. From the main toggle diagram, press the button again to open the HP Envy OSD menu, or toggle right to switch between PC and display mode.
    HP Envy menu with Brightness+ selected
  3. Use the toggle control diagram to navigate the OSD menu.
    Toggle control diagram showing navigation options
    note:
    The toggle control diagram changes as you move through the OSD menu.
  4. Adjust any item by pressing the plus (+) or minus (-) options on the OSD controller.
    Toggle control diagram showing plus (+) and minus (-) options
  5. Press the OSD controller button to select an item. A selected item displays with a radio button icon.
  6. Select Reset to revert to the previous selection within a category. Select Back to return to a previous menu.
note:
After 10 seconds without input while displaying a menu, the OSD automatically closes. All adjustments made in the OSD are saved.

OSD menu options

On-screen display (OSD) menu selections and functional descriptions.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...