hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on an HP computer or printer – Click here

    Information

    Fix intermittent print spooler service errors that may cause print jobs to fail post a Windows update. Click here

hp-concentra-wrapper-portlet

Actions
Loading...

Samsung ML-1630 Laser Printer - Replacing the Toner Cartridge

This document explains how to replace the toner cartridge for the Samsung ML-1630 Laser Printer.
  • The toner LED blinks rapidly and the toner-related messages on the display indicate when toner cartridge should be replaced.
  • The printer stops printing.
At this stage, the toner cartridge needs to be replaced.

Replacing the toner cartridges

Use these steps to replace the toner cartridges.
  1. Turn the printer off, then wait a few minutes for the printer to cool.
  2. Press the top cover lever, completely open the top cover.
    Figure : Example of pressing the top cover lever
  3. Grasp the handles on the toner cartridge and pull to remove the cartridge from the printer.
    Figure : Example of grasping handles on toner cartridge
  4. Take a new toner cartridge out of its package.
    Figure : Example of taking new toner cartridge from packaging
      caution:
    • Don't use sharp objects, such as a knife or scissors, to open the toner cartridge package. You could damage the surface of the toner cartridge.
    • To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 5 Holding side edges of the toner
  5. Holding side edges of the toner cartridge, thoroughly rock it from side to side to redistribute the toner.
    Figure : Example of holding sides and rock side to side
  6. Place the toner cartridge on a flat surface, as shown, and remove the paper covering the toner cartridge.
    Figure : Example of placing toner cartridge to removing paper covering
      caution:
    • Do not touch the green surface, the OPC drum or the front of each toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
    • If you leave the top cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the top cover should the installation need to be halted for any reason.
    note:
    If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
  7. Insert the cartridge into place.
    Figure : Example of inserting the cartridge into place
  8. Hold the top cover and close it slowly and carefully, until the cover is the cover is securely latched.
    Figure : Example of holding the top cover and closing it slowly
    note:
    If the top cover is not completely closed, the printer will not operate.
      caution:
    Be careful not to pinch your fingers, since the top cover is very heavy.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...