
HP ProDesk 600 G2 Desktop Mini PC
Specification
|
Description
|
Intel 6th generation processors
|
All HP ProDesk 600 G2 Business PC models featuring this technology include processors that are part of the Intel Stable Image Platform Program (SIPP) designed to ensure the stability promise inherent in the value proposition of the HP ProDesk and ProOne 600 G2 Business PC, thus making these models the most stable, secure, and manageable platforms available to enterprises today.
Intel Advanced Management Technology (AMT) v9.0 – an advanced set of remote management features and functionality which provides network administrators the latest and most effective tools to remotely discover, heal, and protect networked client systems regardless of the system's health or power state. AMT 9.0 includes the following advanced management functions:
|
Specification
|
Description
|
||||||||||||||||||||||||||||||||||||||||||
VGA controller
|
Integrated
|
||||||||||||||||||||||||||||||||||||||||||
Display port
|
Multimode capable; supports HDCP, Display Port Audio (2 streams), HBR2 link rates and Multi-Stream Technology for a maximum of 3 displays (including the integrated panel)
|
||||||||||||||||||||||||||||||||||||||||||
Bus type
|
N/A
|
||||||||||||||||||||||||||||||||||||||||||
RAMDAC
|
N/A
|
||||||||||||||||||||||||||||||||||||||||||
Memory
|
Intel graphics do not have dedicated memory but utilizes some of the computer’s system memory The amount of memory used for graphics depending on the amount of system memory installed, BIOS settings, operating system, and system load. 32 MB is pre-allocated for graphics use at system boot time. Additional memory can be allocated at boot time by the BIOS for PAVP (Protected Audio Video Playback) support for playback of protected video content.
Additional memory is allocated for graphics as needed using Intel's Dynamic Video Memory Technology (DVMT), to provide an optimal balance between graphics and system memory use.
|
||||||||||||||||||||||||||||||||||||||||||
Maximum graphics memory
|
Windows 7: Up to 1.7 GB
Windows 8.1: Up to 1.8 GB
|
||||||||||||||||||||||||||||||||||||||||||
Maximum color depth
|
32 bits/pixel
|
||||||||||||||||||||||||||||||||||||||||||
Graphics/video API support
|
6th generation core processors:
The Processor graphics contains a refresh of the seventh generation graphics core enabling substantial gains in performance and lower power consumption. Up to 16 EU support.
Next Generation Intel Clear Video Technology HD Support is a collection of video playback and enhancement features that improve the end user's viewing experience.
DirectX Video Acceleration (DXVA) support for accelerating video processing
Advanced Scheduler 2.0, 1.0
Windows 7, Windows 8, Linux OS Support
DirectX 11.1
Open GL 4.3
Open CL 1.2
|
||||||||||||||||||||||||||||||||||||||||||
Supported display resolutions and refresh rates
|
|
Specification
|
Description
|
Memory
|
2 GB 128-bit wide frame buffer operating at 1150 MHz
|
Controller clock speed
|
AMD Radeon R9 350 GPU operating at 925 MHz
|
Multidisplay support
|
A maximum of 4 displays are supported by the card. A maximum of 2 legacy displays (Native VGA, DVI, or displays connected with passive DisplayPort adapters are considered as legacy)
|
Graphics/API support
|
DIRECTX 11.1, Open GL 4.3, Open CL1.2, UVD 3
|
Output connectors
|
1 x Dual-Link DVI-I, 2x DisplayPort; Includes DVI to VGA adapter
|
Specification
|
Description
|
Introduction
|
Get impressive graphics and high resolution dual-display performance in a low profile, PCI Express x8 graphics add-in card based on the NVIDIA Kepler Graphics Processor. Improve your everyday PC, Web conferencing, and video or photo editing.
|
Memory
|
2 GB DDR3 64-bit wide frame buffer operating at 900 MHz
|
Controller clock speed
|
NVIDIA Kepler GPU operating at 902 MHz
|
Multi-display support
|
A maximum of 4 displays are supported by the card
|
Graphics/API support
|
Microsoft DirectX 12, OpenGL 4.4 and OpenCL 2 APIs, Shade Model 5, UVD 4.2, VCE 2.0, and DirectCompute 11
|
Output connectors
|
1 x Dual-Link DVI-I, 1x DisplayPort; Includes DVI to VGA adapter
Display Port output is multi-mode capable, support Audio, HBR2 and MST
|
Specification
|
Description
|
Unformatted capacity
|
120 GB
|
Architecture
|
Multi-level cell (MLC) NAND
|
Interface
|
Serial ATA 3.0 (6.0 Gb/s)
|
Form factor
|
2.5 inch
|
Height
|
Low profile, 7 mm height
|
Width
|
69.85 mm ± 0.25
|
Length
|
100.45 mm
|
Weight
|
Up to 78 g
|
Bandwidth performance
|
Sustained read: up to 540 MB/s
Sustained write: Up to 480 MB/s
|
Power consumption
|
Average read: < 3.7 W
Average write: 3.7 W
Standby: < 55 mW
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G/0.5 ms
|
Specification
|
Description
|
Unformatted capacity
|
120 GB
234,441,648 (total logical sectors)
|
Architecture
|
ATA 8 Compliant and SATA 3.0 compliant
Supports Mode 2 Multiword DMA
Supports Drive Failure Prediction
Supports SMART Offline Read Scan
Supports Mode 4 PIO
Supports Mode 5 UDMA
Supports HP Drive Protection System
ATA 8 ACS-2 Data / TRIM Support
Support DEVSLP feature
Supports TRIM Command per ATA8 / ACS 2
Supports FIPS-197 features
Support TCG Storage Architecture Core Specification 2.0
|
Interface
|
Serial ATA 3.0 (6.0 Gb/s)
|
Form factor
|
2.5 in
|
Height
|
Low profile, 7 mm height
|
Width
|
69.85 mm ± 0.25
|
Length
|
100.45 mm
|
Weight
|
78 g
|
Bandwidth performance
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 480 MB/s
|
Power consumption
|
Average read: < 3.7 W
Write: 3.7 W
Standby: < 55 mW
|
Environmental
(non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G/0.5 ms
|
Specification
|
Description
|
Unformatted capacity
|
128 GB
250,069,680 (user addressable sectors)
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface
Fully complies with ATA/ATAPI-7 Standard (Partially Complies with ATA/ATAPI-8)
Power Saving Modes: DIPM (Partial / Slumber mode)
Support NCQ : Up to 32 depth
Synchronous Signal Recovery
|
Interface
|
Serial ATA (6.0 Gb/s)
|
Form factor
|
2.5 in
|
Height
|
6.8 mm ± 0.2
|
Width
|
69.85 mm ± 0.25
|
Length
|
100.45 mm ± 0.25
|
Weight
|
54 g
|
Bandwidth performance
|
Sustained sequential read: up to 530 MB/s
Sustained sequential write: up to 140 MB/s
|
Power consumption
|
Average read: < 250 mW
Idle: 50 mW
|
Mean time between failures
|
1,500,000 hours
|
Environmental
(non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G/0.5 ms
|
Specification
|
Description
|
Unformatted capacity
|
128 GB
250,069,680 (user addressable sectors)
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface
Trusted Computing Group(TCG) OPAL compliant encrypted solid state drive
|
Interface
|
Serial ATA (6.0 Gb/s)
|
Form factor
|
2.5 in
|
Height
|
6.8 mm ± 0.2
|
Width
|
69.85 mm ± 0.25
|
Length
|
100.2 mm ± 0.25
|
Weight
|
73 g
|
Bandwidth performance
|
Sustained sequential read: up to 520 MB/s
Sustained sequential write: up to 340 MB/s
|
Power consumption
|
Average read: < 250 mW
Idle: 50 mW
|
Mean time between failures
|
1,500,000 hours
|
Environmental
(non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G/0.5 ms
|
Specification
|
Description
|
Unformatted capacity
|
128 GB
|
Architecture
|
Multi level cell (MLC) NAND
|
Interface
|
SATA 6 Gb/s
|
Dimensions (W x H x D)
|
6.985 x 0.7 x 10.05 cm (2.75 x 0.276 x 3.96 in)
|
Weight
|
73 g
|
Bandwidth performance
|
Sustained sequential read: up to 420 MB/s
Sustained sequential write: up to 260 MB/s
Random read: up to 46k IOPs
Random write: up to 56k IOPs
|
Latency
|
Read: 55 ms
Write: 55 ms
|
DC power requirement
|
4.5 V - 5.5 V
|
Total power consumption
|
Active: 160 mW
Idle: < 85 mW
|
Useful drive life
|
1.2 million device hours
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G/1.0 msec
|
Regulations
|
UL, CSA, EN 60950-2000, CISPR Pub 22 Class B, CNS 13438, AS/NZS
CISPR 22:2002 Class B, Korea KCC, CE Mark
|
Specification
|
Description
|
Unformatted capacity
|
180 GB
|
Architecture
|
Multi level cell (MLC) NAND
|
Interface
|
SATA 3.0 (6 Gb/s)
|
Dimensions (W x H x D)
|
6.985 x 0.7 x 10.05 cm (2.75 x 0.276 x 3.96 in)
|
Weight
|
78 g
|
Bandwidth performance
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 490 MB/s
Random read: 41k IOPs
Random write: 80k IOPs
|
Latency
|
Read: 80 us
Write: 85 us
|
DC power requirement
|
5 VDC 5% - 100 mV ripple p-p
|
Total power consumption
|
Active: 195 mW
Idle: < 85 mW
|
Useful drive life
|
72 TB written, up to 40 GB/day for 5 years
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
|
Specification
|
Description
|
Formatted capacity
|
180 GB
|
Architecture
|
Solid State Drive with SATA interface; ATA 8 Compliant and SATA 3.0 compliant
|
Interface
|
SATA 3.0 (6 Gb/s)
|
Form factor
|
2.5 in
|
Dimensions (W x H x L)
|
69.85 x 7 mm x 100.45 mm (2.75 x 0.27 x 3.95 in)
|
Weight
|
78 g
|
Data transfer rate
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 490 MB/s
|
Power consumption
|
Power-up: 6 W
Read: < 3.7 W
Write: 3.7 W
Standby: <55 mW
DEVSLP: < 7 mW
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1500 G
|
Specification
|
Description
|
Formatted capacity
|
1 TB
|
Spindle speed
|
7200 rpm
|
Drive capacity
|
Solid State Hybrid Drive (SSHD) technology with NAND flash
|
Interface
|
Serial ATA
|
Cache buffer
|
64 MB
|
NAND flash commercial multilevel cell (cMLC)
|
8 GB
|
Number of sectors
|
1,953,525,168
|
Seek time
|
Single track: 2 ms
Average: 11 ms
|
Dimensions (W x H x L)
|
10.2 x 2.01 x 14.7 cm (4 x 0.78 x 5.79 in)
|
Weight
|
400 g (0.88 lb)
|
Operating temperature
|
5° to 55° C (41° to 131° F)
|
Specification
|
Description
|
Formatted capacity
|
1 TB
|
Rotational speed
|
7,200 rpm
|
Interface
|
Serial ATA
|
Buffer size
|
16MB
|
Logical blocks
|
1,953,525,168
|
Seek time
|
Single track: 2 ms
Average: 11 ms
Full-stroke: 21 ms
|
Height
|
1 in/2.54 cm
|
Width
|
1 in/2.54 cm
|
Operating temperature
|
5° to 55° C (41° to 131° F)
|
Specification
|
Description
|
Formatted capacity
|
1 TB
|
Spindle speed
|
5,400 rpm +/- 0.2%
|
Drive type
|
Serial ATA
|
Interface
|
Solid State Hybrid Drive (SSHD) technology with NAND Flash
|
Cache buffer
|
64 MB
|
NAND Flash
Commercial Multilevel Cell (cMLC)
|
8 GB
|
Number of sectors
|
976,773,168
|
Seek time
|
Single track: 2 ms
Average: 12 ms
|
Height
|
9.5 +/- 0.2 mm
|
Width
|
69.85 +/- 0.25 mm
|
Length
|
100.35 +0.20 / -0.25 mm
|
Weight
|
115 g/0.254 lb (max)
|
Operating temperature
|
0° to 60° C (32° to 140° F)
|
Specification
|
Description
|
Unformatted capacity
|
256 GB
500,118,192 (User Addressable Sectors)
|
Architecture
|
Self-encrypting (SED) solid state drive with NAND flash and SATA interface
Fully complies with ATA/ATAPI-7 standard (partially complies with ATA/ATAPI-8)
Power saving modes: DIPM (partial / slumber mode)
Support NCQ : Up to 32 depth
Synchronous signal recovery
|
Interface
|
Serial ATA (6.0 Gb/s)
|
Form factor
|
2.5 in
|
Height
|
6.80 mm ± 0.20
|
Width
|
Up to 54 g
|
Bandwidth performance
|
Sustained sequential read: Up to 540 MB/s
Average: 11 ms
|
Power
|
Power consumption:
Active: typical 250mW
Idle: Typical 50mW
|
Mean time between failure (MTBF)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% to 95%
Shock: 1,500 G/0.5 ms
|
Specification
|
Description
|
Unformatted capacity
|
256 GB
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with 25nm MLC NAND Flash and SATA interface
|
Interface
|
SATA 2 (3 GB/s)
|
NAND flash
|
25 nm MLC NAND flash
|
Dimensions (W x H x L)
|
69.85 x 7 x 100.5 mm (2.75 x 0.27 x 3.95 in)
|
Weight
|
73 g (0.16 lb)
|
Bandwidth performance
|
Sustained sequential 128k read: 450 MB/s
Sustained sequential 128k write: 260 MB/s
Random 4k read: 46k IOPs
Random 4k write: 56k IOPs
|
Latency
|
Read: 55
Write: 55
|
Power consumption
|
Active: 160 mW
Idle: < 85 mW
|
Useful drive life
|
72 TB written, up to 40 GB/day for 5 years
|
Environmental
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G/1 ms
|
Specification
|
Description
|
Capacity
|
256 GB
|
Interface
|
SATA 6 Gb/s
|
Dimensions (W x H x D)
|
6.985 x 0.7 x 10.05 cm (2.75 x 0.276 x 3.96 in)
|
Weight
|
78 g
|
Bandwidth performance
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 490 MB/s
Random read: 41k IOPs
Random write: 80k IOPs
|
Latency
|
Read: 80 us
Write: 85 us
|
DC power requirement
|
5 VDC 5% - 100 mV ripple p-p
|
Total power consumption
|
Active: 195 mW
Idle: < 85 mW
|
Useful drive life
|
72 TB written, up to 40 GB/day for 5 years
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
|
Specification
|
Description
|
Formatted capacity
|
2 TB
|
Rotational speed
|
7,200 rpm
|
Interface
|
SATA 6Gb/s NCQ
|
Cache, multisegmented
|
64 MB
|
Seek time
|
Read: < 8.5 ms
Write: < 9.5 ms
|
Height
|
26.11 mm /1.028 in
|
Width
|
101.6 mm / 4.0 in
|
Depth
|
146.99 mm /5.787 in
|
Seek time
|
Single track: 2 ms
Average: 11 ms
|
Weight
|
626 g (1.38 lb)
|
Operating temperature
|
0° to 60° C (32° to 140° F)
|
Specification
|
Description
|
Formatted capacity
|
500 GB
|
Architecture
|
Self-encrypting (SED) solid state drive with SATA interface
|
Interface
|
Serial ATA 2 (6 GB/s)
|
Form factor
|
2.5 in
|
Height
|
6.80 mm ± 0.20
|
Width
|
69.85 mm ± 0.25
|
Length
|
100.35 mm ± 0.25/0.20
|
Weight
|
< 95 g (0.2 lb)
|
Bandwidth performance
|
Sustained data transfer rate OD: 100 MB/s
I/O data transfer rate: 600 MB/s
|
Power
|
Spinup: 1 A
Idle: 0.7 W
Sleep: 0.18 W
|
Environmental (non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
Relative humidity: 5% to 95%
Shock: 400 G/2 ms
|
Specification
|
Description
|
Unformatted capacity
|
466 GB
|
Rotational speed
|
7,200 rpm
|
Interface
|
Serial ATA 3.0 (6.0 Gb/s)
|
Buffer size
|
16 MB
|
Logical blocks
|
976,773,168
|
Seek time
|
Single Track: 2.0 ms
Average: 12 ms
Full-stroke: 25 ms
|
Height
|
6.8 mm (0.267 in)
|
Width
|
Media diameter: 63.5 mm/2.5 in
Physical size: 70 mm/2.75 in
|
Environmental
(non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
Specification
|
Description
|
Unformatted capacity
|
500 GB
|
Rotational speed
|
7,200 rpm
|
Interface
|
SATA 6 Gb/s
|
Buffer size
|
32 MB
|
Logical blocks
|
976,773,168
|
Seek time
|
Single Track: 1.5 ms
Average: 12 ms
Full-stroke: 25 ms
|
Height
|
6.8 mm (0.267 in)
|
Width
|
Media diameter: 63.5 mm/2.5 in
Physical size: 70 mm/2.75 in
|
Environmental
(non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
Specification
|
Description
|
Unformatted capacity
|
500 GB
|
Rotational speed
|
7,200 rpm
|
Interface
|
Serial ATA 3.0 (6.0 Gb/s)
|
Buffer size
|
16 MB
|
Logical blocks
|
976,773,168
|
Seek time
|
Single Track: 2.0 ms
Average: 11 ms
Full-stroke: 21 ms
|
Height
|
2.54 mm (1 in)
|
Width
|
Media diameter: 8.89mm/3.5 in
Physical size: 10.2 cm/4 in
|
Environmental
(non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
Specification
|
Description
|
Formatted capacity
|
500 GB
|
Spindle speed
|
5,400 rpm +/- 0.2%
|
Drive type
|
Solid State Hybrid Drive (SSHD) technology with NAND Flash
|
Interface
|
SATA 6 Gb/s
|
Cache buffer
|
64 MB
|
NAND flash
commercial multilevel cell (cMLC)
|
8 GB
|
Number of sectors
|
976,773,168
|
Seek time
|
Single track: 2 ms
Average: 12 ms
|
Height
|
6.8 +/- 0.2 mm (0.268 +/-.008 in )
|
Width
|
69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
|
Length
|
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010)
|
Weight
|
95 g (0.209 lb)
|
Operating temperature
|
5° to 55° C (41° to 131° F)
|
Specification
|
Description
|
Unformatted capacity
|
500 GB
|
Architecture
|
Solid State Drive M.2 PCIe Gen 3 x4 NVMe
NVMe 1.1a Compliant
|
Interface
|
M.2 PCIe Gen 3 x4 NVMe
|
Form factor
|
2.5 in
|
Height
|
Low profile, 7 mm height
|
Width
|
69.85 mm ± 0.25
|
Length
|
50 mm ± 0.15
|
Weight
|
Up to 10 g
|
Data transfer rate
(128k Sequential )
|
Sustained read: up to 2150 MB/s
Sustained write: up to 1550 MB/s
|
Power
|
Average read: 4.3 W
Average write: 605 W
Idle: 70 mW
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1000 G peak (operating)
|
Specification
|
Description
|
Unformatted capacity
|
128 GB
|
Architecture
|
Solid State Drive M.2 PCIe Gen 2 x4 AHCI; NCQ Command Set
|
Interface
|
M.2 PCIe x4 Gen 2
|
Form factor
|
M.2 2280
|
Dimensions (W x H x L)
|
22 x 80 x 3.73 mm (0.899 x 3.149 x .146 in)
|
Weight
|
8 g (0.017 lb)
|
Bandwidth performance
|
Sustained read: up to 920 MB/ss
Sustained write: up to 430 MB/s
|
Power
|
Allowable voltage: 3.3V ± 5%
Total power consumption: 5.8 W (Active) ; 80 mW; (Idle)
|
MTBF
|
1.5 M hrs
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1,500 G peak (operating)
|
Regulations
|
Safety TUV UL CB c-UL-us:
EMC/EMI:
|
Specification
|
Description
|
Formatted capacity
|
256 GB
|
Architecture
|
Solid State Drive M.2 PCIe Gen 2 x4 AHCI
NCQ Command Set
|
Interface
|
M.2 PCIe Gen 2 x 4
|
Form factor
|
M.2 2280
|
Height
|
7 mm ± 0.20
|
Width
|
69.85 mm ± 0.25
|
Length
|
50 mm ± 0.15
|
Weight
|
Up to 10 g
|
Data transfer rate
(128k Sequential )
|
Sustained read: up to 2150 MB/s
Sustained write: up to 1200 MB/s
|
Power
|
Average read: 4 W
Average write: 5.1 W
Standby: 700 mW
Idle: 70 mW
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% - 95%
Shock: 1000 G peak (operating)
|
Specification
|
Description
|
Height
|
12.7 mm (0.5 in)
|
Orientation
|
Either horizontal or vertical
|
Interface type
|
SATA/ATAPI
|
Disc recording capacity
|
Up to 8.5 GB DL or 4.7 GB standard
|
Dimensions (W x H x L)
|
128 x 12.7 x 127 mm (5.04 x 0.5 x 5 in) without bezel
|
Weight
|
190 g (0.42 lb)
|
Write speeds
|
DVD-RAM: Up to 5x
DVD-R DL: Up to 6x
DVD+R: Up to 8x
DVD+RW: Up to 8x
DVD+R DL: Up to 6x
DVD-R: Up to 8x
DVD-RW: Up to 6x
CD-R: Up to 24x
CD-RW: Up to 24x
|
Read speeds
|
DVD-RAM: Up to 5x
DVD-RW, DVD+RW: Up to 8x
DVD-R DL, DVD+R DL: Up to 8x
DVD+R, DVD-R: Up to 8x
DVD-ROM DL, DVD-ROM: Up to 8x
CD-ROM, CD-R: Up to 24x
CD-RW: Up to 24x
|
Access time (typical)
|
Random: DVD-ROM and CD-ROM 170 ms
Full stroke: DVD-ROM and CD-ROM 320 ms
Stop time: 6 seconds
|
Power
|
Source: Slimline SATA DC power receptacle
DC power requirement: 5 VDC ± 5%-100 mV ripple p-p
DC current: 5 VDC (< 1000 mA typical, 1600 mA maximum)
|
Environmental (non-condensing)
|
Temperature: 5° to 50° C (41° to 122° F)
Relative humidity: 10% - 80%
|
Specification
|
Description
|
||||||||||||||||||||||||||||||||||||||||||||||||
Height
|
12.7 mm (0.5 in)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Orientation
|
Either horizontal or vertical
|
||||||||||||||||||||||||||||||||||||||||||||||||
Interface type
|
SATA/ATAPI
|
||||||||||||||||||||||||||||||||||||||||||||||||
Disc recording capacity
|
Up to 128 GB QL, 100 GB TL, 50 GB DL or 25 GB standard SL
|
||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions (W x H x L)
|
128 x 12.7 x 127 mm (5.04 x 0.5 x 5 in) without bezel
|
||||||||||||||||||||||||||||||||||||||||||||||||
Weight
|
170 g (0.37 lb)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Write speeds
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
Read speeds
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
Access time (typical)
|
Random
BD-ROM: 350 ms
DVD-ROM: 185 ms
CD-ROM: 165 ms
Full stroke
BD-ROM: 350 ms
DVD-ROM: 345 ms
CD-ROM: 340 ms
|
||||||||||||||||||||||||||||||||||||||||||||||||
Power
|
Source: Slimline SATA DC power receptacle
DC power requirement: 5 VDC ± 5%-100 mV ripple p-p
DC current: 5 VDC -1200 mA typical, 2000 mA maximum
|
||||||||||||||||||||||||||||||||||||||||||||||||
Environmental (non-condensing)
|
Temperature: 5° to 50° C (41° to 122° F)
Relative humidity: 10% - 80%
Maximum wet bulb temperature: 29° C (84° F)
|
Specification
|
Description
|
Height
|
12.7 mm (0.5 in)
|
Orientation
|
Either horizontal or vertical
|
Interface type
|
SATA/ATAPI
|
Dimensions (W x H x L)
|
128 x 12.7 x 127 mm (5.04 x 0.5 x 5 in) without bezel
|
Weight
|
170 g (0.37 lb)
|
Read speeds
|
DVD+R/-R/+RW/
-RW/+R DL /-R DL: Up to 8x
DVD-ROM: Up to 8x
CD-ROM,CD-R: Up to 24x
CD-RW: Up to 24x
|
Access time (typical)
|
Random
DVD-ROM: 170 ms
CD-ROM: 170 ms
Full stroke
DVD-ROM: 320 ms
CD-ROM: 320 ms
|
Power
|
Source: Slimline SATA DC power receptacle
DC power requirement: 5 VDC ± 5%-100 mV ripple p-p
DC current: 5 VDC - < 1000 mA typical, < 1600 mA maximum
|
Environmental (non-condensing)
|
Temperature: 5° to 50° C (41° to 122° F)
Relative humidity: 10% - 80%
Maximum wet bulb temperature: 29° C (84° F)
|
Specification
|
Description
|
Connector
|
RJ-45
|
System interface
|
PCIe + SMBus
|
Controller
|
Intel I219LM Gigabit Ethernet Controller
|
Data rates supported
|
Supports operation at 10/100/1000 Mb/s data rates
|
IEEE compliance
|
IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASETX, and 10BASET applications (802.3ab, 802.3u, and 802.3i, respectively).
IEEE 802.3az support [Low Power Idle (LPI) mode]
IEEE 802.3u auto-negotiation conformance
|
Performance
|
Jumbo Frames (up to 9 kB)
802.1Q & 802.1p
Receive Side Scaling (RSS)
Two Queues (Tx & Rx)
|
Power
|
Ultra Low Power at cable disconnect enables platform support for connected standby
Reduced power consumption during normal operation and power down modes
Integrated Intel Auto Connect Battery Saver (ACBS)
Single-pin LAN Disable for easier BIOS implementation
Fully integrated Switching Voltage Regulator (iSVR)
Low Power Link-Up (LPLU)
|
MAC/PHY interconnect
|
PCIe-based interface for active state operation (S0 state)
SMBus-based interface for host and management traffic (Sx low power state)
|
Management interface
|
MDC/MDIO management interface
|
Security and manageability
|
Intel vPro support with appropriate Intel chipset components
|
Specification
|
Description
|
Connector
|
RJ-45
|
System interface
|
PCIe + SMBus
|
Controller
|
Intel I210 Gigabit Ethernet Controller
|
Memory
|
Integrated Dual 48K configurable transmit receive FIFO Buffers
|
Data rates supported
|
10/100/1000 Mbps
|
IEEE compliance
|
802.1P
802.1Q
802.2
802.3
802.3AB
802.3u
802.3x flow control
|
Bus architecture
|
PCI-E 2.1
|
Data path width
|
Bus-master DMA
|
Hardware certifications
|
FCC, B, CE, TUV-c, TUVus Mark Canada and United States, TUV-GS Mark for European Union
|
Power requirement
|
Aux 3.3 V, 3.0 Watts in 1000 base-T and 1.0 Watts in 100 Base-T
|
Boot ROM support
|
Yes
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
|
Network transfer rate
|
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps (actual rate limited by PCI bus)
|
Environmental
|
Operating temperature: 0° to 55° C (32° to 132° F)
Operating humidity: 85% at 55° C (131° F)
|
Management
|
WOL, PXE, DMI, WFM 2.0
|
Specification
|
Description
|
Wireless LAN standards
|
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
|
Interoperability
|
Wi-Fi certified
|
Frequency band
|
802.11b/g/n
802.11a/n
|
Antenna structure
|
2 transmit
2 receive
|
Data rates
|
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: MCS 0 ~ MCS 15, (20MHz, and 40MHz)
|
Modulation
|
Direct Sequence Spread Spectrum
CCK, BPSK, QPSK, 16-QAM, 64-QAM
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through CCX4 and CCX Lite
WAPI
|
Sub-channels
|
Multinational support with frequency bands and channels compliant to local regulations
|
Network architecture models
|
Ad-hoc (peer to peer)
Infrastructure (access point required)
|
Roaming
|
IEEE 802.11 compliant roaming between band Access Points
|
Output power
|
802.11b: +16 dBm minimum
802.11g: +14 dBm minimum
802.11a: +14 dBm minimum
802.11n HT20 (2.4 GHz): +13 dBm minimum
802.11n HT40 (2.4 GHz): +13 dBm minimum
802.11n HT20 (5 GHz): +12 dBm minimum
802.11n HT40 (5 GHz): +12 dBm minimum
|
Power consumption
|
Transmit: 2.0 W (max)
Receive: 1.6 W (max)
Idle mode (PSP): 180 mW (WLAN Associated)
Idle mode: 60 mW (WLAN unassociated)
Radio disabled: 30 mW
|
Power management
|
ACPI and PCI Express compliant power management
802.11 compliant power saving mode
|
Receiver sensitivity
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11g, 6Mbps: -88 dBm maximum
802.11g, 54Mbps: -74 dBm maximum
802.11a, 6Mbps: -86 dBm maximum
802.11a, 54Mbps: -72 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
|
Antenna type
|
High efficiency antenna with spatial diversity, mounted in the display enclosure
Two embedded dual band 2.4/5 GHz antennas are provided to the card to support WLAN MIMO and Bluetooth communications
|
Form factor
|
PCI-Express M.2 MiniCard
|
Dimensions
|
Type 2230: 2.3 x 22 x 30 mm
Type 1630: 2.3 x 16 x 30 mm
|
Weight
|
Type 2230: 2.8 g
Type 1630: 2 g
|
Operating voltage
|
3.3v +/- 9%
|
Temperature
|
Operating: -10° to 70° C (14° to 158° F)
Non-operating: -40° to 80° C (-40° to 176° F)
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
LED activity
|
LED Amber - Radio OFF; LED White - Radio ON
|
Specification
|
Description
|
||||||||||||
Bluetooth specification
|
4.0+EDR compliant
|
||||||||||||
Frequency band
|
2402 to 2480 MHz
|
||||||||||||
Number of available channels
|
79 (1 MHz) available channels
|
||||||||||||
Data rates and throughput
|
3 Mbps data rate; throughput up to 2.17 Mbps
Synchronous Connection Oriented links up to 3, 64 kbps, voice channels
Asynchronous Connection Less links 2178.1 kbps/177.1 kbps asymmetric or 1306.9 kbps symmetric
|
||||||||||||
Transmit power
|
The Bluetooth component shall operate as a Class II Bluetooth device with a maximum transmit power of +4 dBm for BR and EDR
|
||||||||||||
Receiver sensitivity
|
|
||||||||||||
Power consumption
|
Peak (Tx) 330 mW
Peak (Rx) 230 mW
Selective Suspend 17 mW
|
||||||||||||
Range
|
Up to 10 m (33 ft)
|
||||||||||||
Electrical interface
|
USB 2.0 compliant
|
||||||||||||
Bluetooth software supported link topology
|
Microsoft Windows Bluetooth Software
|
||||||||||||
Electrical interface Bluetooth software supported
|
Point to Point, Multipoint Pico Nets up to 7 slaves
Full support of Bluetooth Security Provisions
|
||||||||||||
Power management certifications
|
Microsoft Windows ACPI, and USB Bus Support
Self-configurable to optimize power conservation in all operating modes, including Standby, Hold, Park, and Sniff
ETS 300 328, ETS 300 826
Low Voltage Directive IEC950
|
||||||||||||
Security
|
All necessary regulatory approvals for supported countries, including
FCC (47 CFR) Part 15C, Section 15.247 & 15.249
|
||||||||||||
Certifications Bluetooth profiles supported
|
UL, CSA, and CE Mark
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
Dial-Up Networking (DUN)
Generic Object Exchange Profile (GOEP)
Object Push Profile (OPP)
File Transfer Profile (FTP)
Synchronization Profile (SYNC)
Hard Copy Cable Replacement (HCRP)
Personal Area Networking Profile (PAN)
Human Interface Device Profile (HID)
FAX Profile (FAX)
Basic Imaging Profile (BIP)
Headset Profile (HSP)
Hands Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
|
Specification
|
Description
|
Wireless LAN standards
|
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
|
Interoperability
|
Wi-Fi certified
|
Frequency band
|
802.11b/g/n
802.11a/n
|
Antenna interface
|
With antennas installed in the system, the antenna peak gain is less than +3dBi in the 2.4 GHz band and less than +4 dBi in the 5 GHz band to allow the device to meet regulatory limits.
|
Data rates
|
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: card will support rates for NSS=1 and NSS=2 for RX and TX for 20 and 40 MHz channels. Short and long guard interval shall be supported.
802.11ac: card will support rates for NSS=1 and NSS=2 for RX and TX for 80 MHz channels. 433Mbps for 1x1 and 867Mbps for 2x2
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES.
WPA2 certification
IEEE 802.11i
WAPI
|
Roaming
|
802.11r fast roaming
|
Output Power (Transmitting)
|
802.11b: +16 dBm minimum
802.11g: +14 dBm minimum
802.11a: +14 dBm minimum
802.11n HT20 (2.4 GHz): +14 dBm minimum
802.11n HT40 (2.4 GHz): +12 dBm minimum
802.11n HT20 (5 GHz): +14 dBm minimum
802.11n HT40 (5 GHz): +12 dBm minimum
802.11ac 80 MHz (5 GHz): +12 dBm minimum
|
Power consumption
|
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode (PSP): 180 mW (WLAN associated)
Idle mode: 50 mW (WLAN unassociated)
Connect standby 10mW (WLAN+BT)
Radio off: 5 mW
|
Bluetooth power consumption
|
Peak operating: 330 mW
Receive: 230 mW
USB selective suspend: 17 mW
|
Power management
|
The product conforms to the ACPI and PCI Express M.2 bus methods to manage power of the WLAN components
Supports all 802.11 compliant power-save modes. These include the basic Power Save Polling (PSP) in 802.11 and Automatic Power Save Delivery (APSD) defined in 802.11e
|
Receiver sensitivity
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11g, 6Mbps: -88 dBm maximum
802.11g, 54Mbps: -74 dBm maximum
802.11a, 6Mbps: -86 dBm maximum
802.11a, 54Mbps: -72 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
802.11ac, 1SS, MCS-0: -86 dBm maximum
802.11ac, 1SS, MCS-9: -61 dBm maximum
802.11ac, 2SS, MCS-0: -83 dBm maximum
802.11ac, 2SS, MCS-9: -58 dBm maximum
|
Form factor
|
PCI-express M.2 form factor
|
Dimensions
|
Type 2230: 2.3 x 22 x 30 mm
Type 1630: 2.3 x 16 x 30 mm
|
Operating voltage
|
3.3v +/- 9%
|
Temperature
|
Operating: –10° to 70° C (14° to 158° F)
Non-operating: –40° to 80° C (–40° to 176° F)
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
Specification
|
Description
|
Wireless LAN standards
|
IEEE 802.11 ac/a/b/g/n
|
Interoperability
|
Wi-Fi certification
WLAN + Bluetooth Combo M.2 Card device shall meet all of the requirements to support Bluetooth 4.1 and backwards compatible with 2.1 with EDR
|
Frequency band
|
802.11b/g/n
802.11a/n/ac
|
Antenna interface
|
With antennas installed in the system, the antenna peak gain is less than +3dBi in the 2.4GHz band and less than +4dBi in the 5GHz band to allow the device to meet regulatory limits.
|
Data rates
|
02.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: card will support rates for NSS=1 and NSS=2 for RX and TX for 20 and 40 MHz channels. Short and long guard interval shall be supported
802.11ac: card will support rates for NSS=1 and NSS=2 for RX and TX for 80 MHz channels. 433Mbps for 1x.
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES.
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through V5
WAPI
|
Roaming
|
802.11r Fast Roaming
|
Output power (transmitting)
|
802.11b: +16 dBm minimum
802.11g: +14 dBm minimum
802.11a: +14 dBm minimum
802.11n HT20 (2.4 GHz): +14 dBm minimum
802.11n HT40 (2.4 GHz): +12 dBm minimum
802.11n HT20 (5 GHz) : +14 dBm minimum
802.11n HT40 (5 GHz): +12 dBm minimum
|
Power consumption
|
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode (PSP): 180 mW (WLAN associated)
Idle mode: 50 mW (WLAN unassociated)
Connect Standby 10mW (WLAN+BT)
Radio off: 5 mW
|
Bluetooth power consumption
|
Peak operating: 330 mW
Receive: 230 mW
USB selective suspend: 17 mW
|
Power management
|
The product conforms to the ACPI and PCI Express M.2 bus methods to manage power of the WLAN components
Supports all 802.11 compliant power-save modes. These include the basic Power Save Polling (PSP) in 802.11 and Automatic Power Save Delivery (APSD) defined in 802.11e
|
Receiver sensitivity for FER < 10%
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11a/g, 6Mbps: -88 dBm maximum
802.11a/g, 54Mbps : -74 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
802.11ac, 1SS, MCS-0: -86 dBm maximum
802.11ac, 1SS, MCS-9: -61 dBm maximum
802.11ac, 2SS, MCS-0: -83 dBm maximum
802.11ac, 2SS, MCS-9: -58 dBm maximum
|
Form factors
|
PCI Express M.2 form factor
|
Operating voltage
|
The card will be powered by a 3.3V, ± 9% supply from the host system
|
Temperature
|
Operating: -10° to 70° C (14° to 158° F)
Non-operating: -40° to 80° C (-40° to 176° F)
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
Specification
|
Description
|
Type
|
Integrated
|
HD stereo codec
|
Realtek 2-channel ALC221 codec
|
Audio I/O ports
|
Front microphone-in (150-K ohm input impedance)
Rear line-In/microphone input (150-K ohm input impedance, function is configurable by audio driver)
Rear line-out (190 ohms Output Impedance, expects at least a 10-K ohm load)
Front headphone-out (0.5 Ohm output impedance, expects at least a 32 ohm load)
Front microphone/headphone jack is re-task able to provide microphone input
Line-in or headphone output to support connecting two headphones to the front of the system. When configured as a second front headphone output, both front headphone outputs are always driven with the same signal.
All ports are 3.5 mm
|
Internal speaker amplifier
|
1.5 W amplifier for the internal speaker only. External speakers must be powered externally. Rear line-in audio port is re-taskable as either line-in or microphone-in.
|
Multi-streaming capable
|
Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to be sent to and from the front and rear jacks.
|
Sampling
|
8 kHz - 192 kHz
|
Wavetable syntheses
|
Yes - uses OS soft wavetable
|
Analog audio
|
Yes
|
Number of channels on line-0ut
|
Stereo (left and right channels)
|
Internal speaker
|
Yes
|
External speaker jack
|
Yes
|
Specification
|
Description
|
HD stereo codec
|
Conexant 2-channel CX5001 codec
|
Audio I/O ports
|
Side headphone
Side headphone/microphone/Line-In (function is configurable by audio driver; re-task able to provide headphone, microphone, or line-In
Rear line out
All ports are 3.5 mm
|
Internal speaker amplifier
|
2 W amplifier for the internal speaker only. External speakers must be powered externally.
|
Multi-streaming capable
|
Multi-streaming can be enabled in the DTS control panel
|
Sampling
|
44.1 kHz - 192 kHz
|
Wavetable syntheses
|
Yes - Uses OS soft wavetable
|
Analog audio
|
Yes
|
Number of channels on line-out
|
Stereo (Left and right channels)
|
Internal speaker
|
Yes
|
External speaker jack
|
Yes
|
Specification
|
Description
|
Physical characteristics
|
|
Keys
|
110 (US) Layout, 111 (EU) Layout – depending upon country
|
Dimensions (L x W x H)
|
2.16 x 44.05 x 15.50 cm (0.85 x 17.34 x 6.10 in)
|
Weight
|
700 g (24.69 lb)
|
Connectivity
|
USB cable
|
Feature summary
|
Full-size ultra-quiet keyboard with numerical pad and 12 function keys
One-touch simplicity for Microsoft Lync or Skype for Business calls with dedicated keys and LED light indicators
|
Illuminated keys
|
Incoming call – Blinks Green
Call in progress –Green
Microphone mute – Orange
Audio mute – Orange
Screen sharing – Orange
Stop webcam – Orange
|
Other call control keys
|
End/decline Call
Volume up and down rocker key
|
Microsoft Lync / Outlook
|
Fn+F12 – Lync or Skype for Business Calendar will open. If Lync or Skype for Business is not available will bring Outlook Calendar
Fn+F11 – Lync or Skype for Business Contact will open. If Lync or Skype for Business is not available will bring Outlook Contact list
note: |
Functions keys
|
Fn+F10 – System settings
Fn+F9 – Devices
Fn+F8 – Search
Fn+F7 – Blank
Fn+F6 – Up brightness adjustment
Fn+F5 – Down brightness adjustment
Fn+F4 – Display options
Fn+F3 – File explorer
Fn+F2 – System lock
Fn+F1 – System sleep
|
System requirements
|
Available USB port
Windows 7, Windows 8.x, and Windows 10
Server: Microsoft Lync Server 2010 or 2013 and Skype for Business Server 2015
Client: Microsoft Lync 2013 version 15.0.46xx or newer or Skype for Business
note: |
Approvals
EMC
product safety
|
FCC; CE; ACA (C-tick); EAC, UL, CE Mark
|
Specification
|
Description
|
Physical characteristics
|
|
Keys
|
104, 105, 106, 107, 109 layout (depending upon country)
|
Dimensions (L x W x H)
|
436.8 ± 1.5 x 137.6 ± 1.0 x 21.0 ± 1.0 cm (171.97 x 68.35 x 8.27 in)
|
Weight
|
0.6± 0.08 kg (1.32 lb) minimum
|
Electrical
|
|
Operating voltage
|
+ 4.4 – 5.25 VDC
|
Power consumption
|
50 mA maximum (with 5 VDC power supplied and three LEDs ON)
|
System interface
|
USB Type A plug connector
|
ESD
|
Contact discharge: 2, 4,6,8 KV
Air discharge: 2, 4, 8,10,12.5 KV
|
EMI - RFI
|
Conforms to FCC rules for a Class B computing device
|
Microsoft PC 99 - 2001
|
Functionally compliant
|
Mechanical
|
|
Keycaps
|
Low-profile design
|
Switch actuation
|
60 ± 12.5 g nominal peak force with tactile feedback
|
Switch life
|
10 million keystrokes (Life tester)
|
Switch type
|
Contamination-resistant switch membrane
|
Key-leveling mechanisms
|
For all double-wide and greater-length keys
|
Cable length
|
1.8 m (6 ft)
|
Microsoft PC 99 - 2001
|
Mechanically compliant
|
Environmental
|
|
Acoustics
|
43 dBA maximum sound pressure level
|
Temperature
|
Operating: 10° to 50° C (50° to 122° F)
Non-operating: -30° to 60° C (-22° to 140° F)
|
Humidity
|
Operating: 10% to 90% (non-condensing at ambient)
Non-operating: 20% to 80% (non-condensing at ambient)
|
Shock
|
Operating: 40 g, six surfaces
Non-operating: 80 g, six surfaces
|
Vibration
|
Operating: 2 g peak acceleration
Non-operating: 4 g peak acceleration
|
Drop (out of box)
|
66 cm (26 in) on carpet, six-drop sequence
|
Drop (in box)
|
76.2 cm (30 in) on concrete, 16-drop sequence
|
Approvals
|
UL, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, KC
|
Ergonomic compliance
|
ANSI HFS 100, ISO 9241-4, and TUVGS
|
Kit contents
|
|
Keyboard
|
Installation guide
|
Warranty card
|
Safety and comfort guide
|
Specification
|
Description
|
Physical characteristics
|
|
Keys
|
104, 105, 106, 107, 109 layout (depending upon country)
|
Dimensions (L x W x H)
|
46.28 x 16.43 x 2.79 cm (18.22 x 6.47 x 1.1 in)
|
Weight
|
0.9 kg (2 lb) minimum
|
Electrical
|
|
Operating voltage
|
+ 5 VDC ± 10%
|
Power consumption
|
50 mA maximum (with three LEDs ON)
|
System interface
|
PS/2 6-pin mini din connector
|
ESD
|
CE level 4, 15 kV air discharge
|
EMI - RFI
|
Conforms to FCC rules for a Class B computing device
|
Microsoft PC 99 - 2001
|
Functionally compliant
|
Mechanical
|
|
Keycaps
|
Low-profile design
|
Switch actuation
|
55 g nominal peak force with tactile feedback
|
Switch life
|
20 million keystrokes (using Hasco modified tester)
|
Switch type
|
Contamination-resistant switch membrane
|
Key-leveling mechanisms
|
For all double-wide and greater-length keys
|
Cable length
|
1.8 m (6 ft)
|
Microsoft PC 99 - 2001
|
Mechanically compliant
|
Environmental
|
|
Acoustics
|
50 dBA maximum sound pressure level
|
Temperature
|
Operating: 0° to 40° C (32° to 104° F)
Non-operating: -30° to 65° C (-22° to 149° F)
|
Humidity
|
Operating: 15% to 80% (non-condensing at ambient)
Non-operating: 15% to 90% (non-condensing at ambient)
|
Shock
|
Operating: N/A
Non-operating: 65 in 2.9 ms, six surface; 30g 266 inch/second; 50 g 266 inch/second six surface
|
Vibration
|
Operating: 2 g peak acceleration
Non-operating: Starting at 5 Hz, vary the frequency of vibration from 5 to 500 Hz and back to 5 Hz at a Logarithmic sweep rate of 1 octave per minute.
|
Drop (out of box)
|
66 cm (26 in) on carpet, six-drop sequence
|
Drop (in box)
|
76 cm (29.93 in) on concrete, 16-drop sequence
|
Approvals
|
CUL, ICES-003 Class B, FCC, CE Mark, TUV GS, VCCI, BSMI, C-Tick, KC
|
Ergonomic compliance
|
ANSI HFS 100, ISO 9241-4, and TUVGS
|
Specification
|
Description
|
Physical characteristics
|
|
Keys
|
104, 105, 106, 107, 109 layout (depending upon country)
|
Dimensions (L x W x H)
|
436.8 ± 1.5 x 137.6 ± 1 x 21.0 ± 1 cm (171.97 x 68.35 x 8.27 in)
|
Weight
|
600 ± 80 g (1.32 lb)
|
Electrical
|
|
Operating voltage
|
+ 4.4 – 5.25VDC
|
Power consumption
|
50 mA maximum (with 5 VDC power supplied and three LEDs ON
|
System interface
|
PS/2 6-pin mini din connector
|
ESD
|
Contact discharge: 2, 4,6,8KV
Air discharge: 2, 4, 8,10,12.5KV
|
EMI - RFI
|
Conforms to FCC rules for a Class B computing device
|
Microsoft PC 99 - 2001
|
Functionally compliant
|
Mechanical
|
|
Keycaps
|
Low-profile design
|
Switch actuation
|
60 ± 12.5 g nominal peak force with tactile feedback
|
Switch life
|
10 million keystrokes (Life tester)
|
Switch type
|
Contamination-resistant switch membrane
|
Key-leveling mechanisms
|
For all double-wide and greater-length keys
|
Cable length
|
1.8 m (6 ft)
|
Microsoft PC 99 - 2001
|
Mechanically compliant
|
Environmental
|
|
Acoustics
|
43 dBA maximum sound pressure level
|
Temperature
|
Operating:
10° to 50° C (50° to 122° F)
Non-operating:
-30° to 60° C (-22° to 140° F)
|
Operating humidity
|
Operating:
10% to 90% (non-condensing at ambient)
Non-operating:
20% to 80% (non-condensing at ambient)
|
Operating shock
|
Operating:
N/A
Non-operating:
65 inch 2.9 ms, six surface; 30 g 266 inch/second; 50 g 266 inch/second six surface
|
Operating vibration
|
Operating:
2 g peak acceleration
Non-operating:
Starting at 5 Hz, vary the frequency of vibration from 5 to 500 Hz and back to 5 Hz at a Logarithmic sweep rate of 1 octave per minute.
|
Drop (out of box)
|
66 cm (26 in) on carpet, six-drop sequence
|
Drop (in box)
|
76 cm (29.93 in) on concrete, 16-drop sequence
|
Approvals
|
UL, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, KC
|
Ergonomic compliance
|
ANSI HFS 100, ISO 9241-4, and TUVGS
|
Specification
|
Description
|
Keyboard
|
|
Dimensions (H x L x W)
|
436.8 ± 1.5 x 137.6 ± 1 x 21 ± 1 cm (171.97 x 68.35 x 8.27 in)
|
Weight - without two AA Alkaline batteries
|
560 ± 80 g (1.23 lb)
|
Mouse
|
|
Dimensions (H x L x W)
|
37 x 115 x 62.9 mm (1.46 x 4.53 x 2.47 in)
|
Weight - without two AA Alkaline batteries
|
67 g (0.15 lb)
|
Receiver
|
|
Dimensions (H x L x W)
|
8.4 x 45.5 x 18.4 mm (0.33 x 1.79 x 0.72 in)
|
Weight
|
5.9 g (0.21 oz)
|
Cable length - minimum
|
1.8 m (6 ft)
|
Range
|
10 m (32.8 ft)
|
System requirements1
|
Available USB port for the receiver
CD-ROM Drive
note: |
Approvals
|
|
Product safety
|
UL; CSA /TUV (Europe only); CE Mark; CB Report
|
Ergonomics
|
ANSI; ISO (Europe only); GS Mark (Germany only)
|
EMC
|
FCC; CE; ACA (-tick); BSMI; KC ; VCCI
|
CE mark
|
EN 55022:2010; EN 55024; EN 301489-1; EN 61000
|
Design guidelines for PCs
|
PC 99 – connector overmold colors; PC 2001 – full functionality
|
Telecom
|
All local telecom requirements and approvals for intended markets
|
USA
|
FCC Title 47 CFR, Par 15, Subpart C; other local requirements
|
Country support
|
Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Canada, Chile, China, Croatia Czech Republic, Cyprus, Denmark, Ecuador, Estonia, Finland, France, Germany, Greece, HK, Hungary, India, Indonesia, Ireland, Israel, Italy, Japan, Korea, Latvia, Lithuania, Luxemburg, Malta, Mexico, Malaysia, Netherlands, Norway, NZ, Peru, Philippines, Poland, Portugal, Romania, Russia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, UK, Ukraine, United Arab Emirates, US, Venezuela, Vietnam, and up to 193 countries worldwide
|
Environmental
|
Keyboard contains 25% post-consumer recycled plastic material.
|
Specification
|
Description
|
Physical Characteristics
|
|
Dimensions (H x L x W)
|
449 x 168 x 35 mm (17.67x 6.62 x 1.38 in)
|
Weight
|
0.77 kg (1.7 lb)
|
Keys
|
104 (US) Layout, 105 (EU) layout – depending upon country
|
Electrical
|
|
Operating voltage
|
+ 5VDC ± 5%
|
Power consumption
|
50 mA maximum (with three LEDs ON)
|
System interface
|
USB Type A plug connector
|
ESD
|
CE level 4, 15 kV air discharge
|
EMI - RFI
|
Conforms to FCC rules for a Class B computing device
|
Microsoft PC 99 - 2001
|
Functionally compliant
|
Mechanical
|
|
Keycaps
|
Stepped profile design
|
Switch actuation
|
55 g nominal peak force with tactile feedback
|
Switch life
|
20 million keystrokes
|
Switch type
|
Contamination-resistant switch membrane
|
Key-leveling mechanisms
|
For all double-wide and greater-length keys
|
Cable length
|
2.2 m (7 ft)
|
Microsoft PC 99 - 2001
|
Mechanically compliant
|
Acoustics
|
43 dBA maximum sound pressure level
|
Environmental
|
|
Temperature
|
Operating: 10° to 50° C (50° to 122° F)
Non-operating: -20° to 65° C (4° to 149° F)
|
Humidity
|
Operating: 10% to 95% (non-condensing at ambient)
Non-operating: 0% to 95% (non-condensing at ambient)
|
Shock
|
Operating: 40 g, six surfaces
Non-operating: 80 g, six surfaces
|
Vibration
|
Operating: 2 g peak acceleration
Non-operating: 4 g peak acceleration
|
Drop (out of box)
|
66 cm (26 in) on carpet, six-drop sequence
|
Drop (in box)
|
107 cm (42 in) on concrete, 16-drop sequence
|
Operating system support
|
Windows 7
Windows Vista
Windows XP Professional
|
Approvals
|
UL, cUL, FCC, CE, TUV GS, VCCI, BSMI, C-Tick, KCC, USB-IF, WHQL, EN/IEC 60601-1, IP66/NEMA4X
|
Ergonomic compliance
|
ANSI HFS 100, ISO 9241-4, and TUVGS
|
Specification
|
Description
|
Physical characteristics
|
|
Dimensions (H x L x W)
|
46.3 x 16.1 x 3.3 cm (18.2 x 6.3 x 1.3 in)
|
Weight
|
0.9 kg (2 lb) minimum
|
Keys
|
104, 105, 106, 107, 109 layout
(depending upon country)
|
Form factor
|
USB basic smart card keyboard
|
Colors
|
Carbonite/Silver
|
Electrical
|
|
Operating voltage
|
+ 5 VDC ± 5%
|
Power consumption
|
100 mA maximum (with four LEDs ON)
|
System interface
|
USB Type A plug connector
|
ESD
|
CE level 4, 15 kV air discharge
|
EMI - RFI
|
Conforms to FCC rules for a Class B computing device
|
Microsoft PC 99 - 2001
|
Functionally compliant
|
Mechanical
|
|
Languages
|
30+ available
|
Keycaps
|
Standard design
|
Switch actuation
|
55 g nominal peak force with tactile feedback
|
Switch life
|
20 million keystrokes
(using Hasco modified tester)
|
Switch type
|
Contamination-resistant membrane
|
Key-leveling mechanisms
|
For all double-wide and greater-length keys
|
Cable length
|
1.8 m (6 ft)
|
Microsoft PC 99 - 2001
|
Mechanically compliant
|
Acoustics
|
43 dBA maximum sound pressure level
|
Environmental
|
|
Temperature
|
Operating: 10° to 50° C (50° to 122° F)
Non-operating: -30° to 60° C (-22° to 140° F)
|
Humidity
|
Operating: 10% to 90% (non-condensing at ambient)
Non-operating: 20% to 80% (non-condensing at ambient)
|
Shock
|
Operating: 40 g, six surfaces
Non-operating: 80 g, six surfaces
|
Vibration
|
Operating: 2 g peak acceleration
Non-operating: 4 g peak acceleration
|
Drop (out of box)
|
66 cm (26 in) on carpet, six-drop sequence
|
Drop (in box)
|
107 cm (42 in) on concrete, 16-drop sequence
|
SmartCard function
|
|
Support
|
All ISO 7816 smart cards
|
Interface
|
Reads from and writes to all ISO7816-1, 2, 3, 4 memory and microprocessor smart cards (T = 0, T = 1)
|
Chipset
|
SCM STCIII
|
Standard APIs supported
|
PC/SC, EMV2000, CT-API
|
Power
|
USB Port
Short circuit detection (protects smart card and reader)
Power supply compliant with ISO7816 and EMV (5V, 60 mA)
Supports 3-V and 5-V cards
|
Power consumption
|
100-mA maximum draw
|
Communication
|
From card: 9600 bps to 330,000 bps
From computer: 12 Mbps (USB transfer speed)
|
Landing mechanism
|
Contact device: Friction contact
Card insertions rating: Up to 100,000 insertion cycles
|
Interface modes
|
CCID protocol
|
Reader performance interface
|
USB connection
|
Electro-magnetic standards
|
Europe: 2004/108/EC
USA: USAFCC part 15
|
Approvals
|
CE-Mark, UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC, EMV2000, USB-IF
|
Ergonomic compliance
|
ISO 9241-4, TUVGS
|
Kit contents
|
Keyboard, I/O Security and Documentation CD, warranty card
|
Specification
|
Description
|
Dimensions (H x L x W)
|
37.3 x 114.97 x 62.86 mm (1.47 x 4.53 x 2.47 in)
|
Weight
|
102 g (3.360 oz)
|
Cable length
|
180 cm (70.9 in)
|
System requirements
|
Available USB port
|
Environmental
|
|
Temperature
|
Operating: 0° to 40° C (32° to 104° F)
Non-operating: -20° to 60° C (-4° to 140° F)
|
Humidity
|
Operating: 10% to 90% (non-condensing at ambient)
|
Mechanical
|
|
Resolution
|
1000 dpi
|
Tracking speed
|
45 cm/s
|
Cable length
|
180 cm (70.9 in)
|
Specification
|
Description
|
BIOS
|
HP BIOSphere
HP driveLock
HP BIOS protection
BIOS update via network
Master boot record security
Power on authentication
Secure erase
Hybrid boot (Windows 8.1 & higher)
Measured boot (Windows 8.1 & higher)
Secure boot (Windows 8.1 & higher)
Absolute persistence module
|
Multimedia
|
Cyberlink Power DVD, BD
Cyberlink Power2Go (Secure Burn)
|
Communication
|
Intel Wireless Display (WiDi) Software for Windows
Native Miracast Support
|
HP value add software
|
HP ePrint Driver
HP Recovery Disc Creator (Windows 7 only)
HP Recovery Manager
HP Support Assistant
Windows 10 Welcome App
|
Third party
|
Foxit PhantomPDF Express for HP
|
Microsoft products
|
Buy Office
Bing search
Skype
|
Manageability
|
HP SoftPaq Download Manager (SDM)
HP System Software Manager (SSM)
HP BIOS Config Utility (BCU)
HP Client Catalog
HP CIK for Microsoft SCCM8
LANDESK Management
HP BIOS Config Utility (BCU)
Discover HP Touchpoint Manager
|
Client security software
|
HP Drive Encryption
HP Client Security Manager
Microsoft Security Essentials
Microsoft Defender
TPM 1.2/2.0
|
Specification
|
Description
|
Standard efficiency
|
65W active PFC 89% average efficiency at 115V
90W active PFC 89% average efficiency at 115V
|
80 PLUS bronze
|
N/A
|
80 PLUS gold
|
N/A
|
80 PLUS platinum
|
N/A
91/93/90% efficient at 20/50/100% load (230 V)
|
Operating voltage range
|
90 - 264 VAC
|
Rated voltage range
|
100 - 240 VAC
|
Rated line frequency
|
50/60 Hz
|
Operating line frequency
|
47 – 63 Hz
|
Rated input current
|
N/A
|
DC Output
|
+19.5V
|
Current leakage (NFPA 99: 2102)
|
Less than 500 microamps of leakage current at 120 VAC with the ground wire disconnected, as required for non-patient electrical appliances and equipment used in a patient care facility or that contact patients in normal use. Per section 10.3.5.1.
Less than 100 microamps of leakage current at 120 VAC with the ground wire intact with normal polarity, as required for non-patient electrical appliances and equipment used in a patient care facility or that contact patients in normal use. Per section 10.3.5.1.
|
Power supply fan
|
N/A
|
Power cord length
|
N/A
|
External power adapter
|
N/A
|
Dimensions
|
N/A
|
Total cord length
|
N/A
|
Specification
|
Description
|
Chassis (W x H x D)
|
175 x 34 x 177 mm (6.9 x 1.3 x 7.0 in)
|
System volume
|
1.05 L (62.79 cu in)
|
System weight
|
1.3 kg (2.9 lb)
|
Max supported weight
|
35.0 kg (77.0 lb)
|
Stand dimensions
|
19.5 x 117 x 160 mm (77x 4.6 x 6.3 in)
Weight: 477 g (0.1 lbs)
|
Packaging (H x W x D)
|
198 x 290 x 500 mm (7.8 x 11.4 x 19.7 in)
|
Shipping weight
|
4.1 kg
(9 lb)
|
Palletization Profile
|
8 units per layer
10/12 layer max
80/96 per pallet
47.126 x 39.291 x 99.252 in (including pallet)
|
Specification
|
Description
|
Preinstalled
|
Windows 10 Pro 64
Windows 10 Home 64
Windows 8.1 Pro 64
Windows 8.1 64
Windows 7 Professional 64 (available through downgrade rights from Windows 10 Pro)
Windows 7 Professional 32 (available through downgrade rights from Windows 10 Pro
Windows 7 Professional 64
Windows 7 Professional 32
|
Preinstalled (other)
|
FreeDOS 2.0
NeoKylin Linux 64 (China only)
|
Web-supported
|
Windows 10 Pro 64
Windows 10 Home 64
Windows 8.1 Pro 64
Windows 8.1 64
Windows 7 Professional 64 (available through downgrade rights from Windows 10 Pro)
Windows 7 Professional 32 (available through downgrade rights from Windows 10 Pro
Windows 10 Enterprise 64
Windows 8.1 Enterprise 64
Windows 7 Enterprise 64
Windows 7 Enterprise 32
|