hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

Replacing Cartridges for HP Officejet 7610 Wide Format e-All-in-One Printer Series

This document is for the HP Officejet 7610 Wide Format e-All-in-One Printer Series.
This document contains steps for replacing the cartridges in your HP printer.

Cartridges types

Consult the following table to identify the correct cartridges for your area.
Region
Black cartridge
Cyan cartridge
Magenta cartridge
Yellow cartridge
The Americas
HP 932 Black
HP 933 Cyan
HP 933 Magenta
HP 933 Yellow
Europe
HP 932 Black
HP 933XL Cyan
HP 933XL Magenta
HP 933XL Yellow
Middle East and Africa
HP 932 Black
HP 933XL Cyan
HP 933XL Magenta
HP 933XL Yellow
Asia Pacific
HP 932 Black
HP 933XL Cyan
HP 933XL Magenta
HP 933XL Yellow
Purchase replacement cartridges and other supplies from the HP Store or local retailers.

Replacing cartridges

Follow these steps to replace one or more cartridges in the HP printer.
  1. Press the Power button to turn on the printer, if it is not already on.
  2. On the front of the printer, open the carriage access door.
    Figure : Open the carriage access door
    Image: Open the carriage access door.
  3. Open the cartridge access door. The carriage moves to the carriage access area. Wait until the carriage is idle and silent before proceeding.
    Figure : Open the cartridge access door
    Image: Open the cartridge access door.
  4. Press the front of the cartridge to release it, and then pull it toward you to remove it from its slot.
    Figure : Remove the cartridge from its slot
    Image: Remove the cartridge from its slot.
  5. Remove the new cartridge from its packaging.
  6. Hold the cartridge so that the cartridge contacts are facing toward the printer.
  7. Slide the new cartridge into its slot, and then gently push it forward until it clicks into place.
    note:
    Make sure that the colored dot on the cartridge label matches the colored dot on the slot.
    Figure : Insert the cartridge into its color-coded slot
    Image: Insert the cartridge into its color-coded slot.
  8. Repeat these steps for other cartridges, if necessary.
  9. Close the cartridge access door.
    Figure : Close the cartridge access door
    Image: Close the cartridge access door.
  10. Close the carriage access door.
    Figure : Close the carriage access door
    Image: Close the carriage access door.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...