hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Information regarding recent vulnerabilities

    HP is aware of the recent class of vulnerabilities referred to as “speculative execution side-channel attacks”. HP has released a security bulletin for systems with Intel x86 processor, and will continue to provide more information on other processors (ARM, AMD) as it becomes available. 

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet Pro - Configure IP network settings

Introduction
Use the following sections to configure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and not of the HP printer drivers. Go to Microsoft at www.microsoft.com.
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
  note:
The steps vary according to the type of control panel.
  1. Open the HP Embedded Web Server (EWS):
    1. 2-line control panels: On the printer control panel, press the OK button. Open the Network Setup menu, and then select Show IP Address to display the IP address or host name.
      Figure : 2-line control panel
      Touchscreen control panels: From the Home screen on the printer control panel, touch the Connection Information button, and then touch the Network Connected button or the Network Wi-Fi ON button to display the IP address or host name.
      Figure : Touchscreen control panel
    2. Open a Web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
      Figure : Example of an IP address in a browser window
        note:
      If the Web browser displays a There is a problem with this website’s security certificate message when attempting to open the EWS, click Continue to this website (not recommended).
      Choosing Continue to this website (not recommended) will not harm the computer while navigating within the EWS for the HP printer.
  2. Click the Networking tab to obtain network information. Change settings as needed.
Rename the printer on a network
If you want to rename the printer on a network so that it can be uniquely identified, use the HP Embedded Web Server.
  note:
The steps vary according to the type of control panel.
  1. Open the HP Embedded Web Server (EWS):
    1. 2-line control panels: On the printer control panel, press the OK button. Open the Network Setup menu, and then select Show IP Address to display the IP address or host name.
      Figure : 2-line control panel
      Touchscreen control panels: From the Home screen on the printer control panel, touch the Connection Information button, and then touch the Network Connected button or the Network Wi-Fi ON button to display the IP address or host name.
      Figure : Touchscreen control panel
    2. Open a Web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
      Figure : Example of an IP address in a browser window
        note:
      If the Web browser displays a There is a problem with this website’s security certificate message when attempting to open the EWS, click Continue to this website (not recommended).
      Choosing Continue to this website (not recommended) will not harm the computer while navigating within the EWS for the HP printer.
  2. Open the System tab.
  3. On the Device Information page, the default printer name is in the Device Status field. You can change this name to uniquely identify this printer.
      note:
    Completing the other fields on this page is optional.
  4. Click the Apply button to save the changes.
Manually configure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
  note:
The steps vary according to the type of control panel.
2-line control panels
  1. On the printer control panel, press the OK button.
    Figure : 2-line control panel
  2. Open the following menus:
    • Network Setup
    • TCP/IP configuration
    • Manual
  3. Use the arrow keys and the OK button to enter the IP address, subnet mask, and default gateway, and then touch the OK button to save the changes.
Touchscreen control panels
  1. From the Home screen on the printer control panel, touch the Setup button.
    Figure : Touchscreen control panel
  2. Open the following menus:
    • Network Setup
    • TCP/IP configuration
    • Manual
  3. Use the keypad on the touchscreen to enter the IP address, and touch the OK button. Touch the Yes button to confirm.
  4. Use the keypad on the touchscreen to enter the subnet mask, and touch the OK button. Touch the Yes button to confirm.
  5. Use the keypad on the touchscreen to enter the default gateway, and touch the OK button. Touch the Yes button to confirm.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...