hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

hp-concentra-wrapper-portlet

Actions
Loading...

HP Photosmart C4100 Series All-in-One - Installing Print Cartridges

Introduction

This document contains information about installing the print cartridges.

Installing the print cartridges

note:
The HP All-in-One must be powered on before you can insert the printcartridge.
  1. Place the unit flat on a level surface.
  2. Open the print cartridge door by lowering it until it stops. The print carriage moves to the far right side of the HP All-in-One.
    Figure : Print cartridge door and print carriage
  3. Pull the pink tab to remove the tape from the print cartridge.
    Figure : Removing the pink tab
      caution:
    Donot touch or remove the ink nozzles orcopper-colored contacts, or re-tape thecartridges.
    Figure : Do not touch ink nozzles or copper-colored contacts
  4. Insert each print cartridge as follows:
    note:
    • Insert the tri-color print cartridge in the slot on the left side, marked with a green label.
    • Insert the black (or photo) print cartridge in the slot on the right side, marked with a black and orange label.
    1. Hold the print cartridge with the HP label facingup.
    2. Push the print cartridge firmly into the corresponding slot until it snaps intoplace.
      Figure : Inserting the print cartridge
      Figure : Print cartridges properly installed
  5. Close the access door.
    Figure : Access door being closed

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...