Evo N180 - Installing the Modem Board

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update"

hp-share-print-widget-portlet

Actions

Information

Information regarding recent vulnerabilities
HP is aware of the recent vulnerabilities commonly referred to as "Spectre" and "Meltdown". HP has published a security bulletin with patches for these issues and a list of impacted systems. We will continue to update the bulletin as more information becomes available and encourage customers to check the bulletin frequently.

hp-concentra-wrapper-portlet

Actions

Evo N180 - Installing the Modem Board

Removing the Modem Board

Installing the Modem Board

Removing the Modem Cable

Installing the Modem Cable

Installing the Modem Board and Modem Cable

Removing the Modem Board

Prepare the computer for disassembly.
Turn the computer bottom side up with the front facing forward.
Remove the expansion cover as described in the Memory Expansion Board Section.
Disconnect the modem cable from the modem board 1 (Figure 5-9).
Spread the retaining tabs 2 on each side of the modem board.

The board releases and rests at an angle.
Remove the modem board by pulling it away from the socket at an angle 3.

Installing the Modem Board

Reverse the above procedure to install a modem board.

Removing the Modem Cable

The modem cable is included in the Cable Kit (spare part number 253946-001).

Prepare the computer for disassembly.
Remove the system board.
Turn the system board bottom side up with the rear panel facing forward.
Disconnect the modem cable ¹ from the modem and route it from between the modem connector ² and the memory expansion ³ and video memory connectors ⁴ .
Remove the tape ⁵ that secures the modem cable to the system board.
Disconnect the modem cable from the system board ⁶ .