hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Information regarding recent vulnerabilities

    HP is aware of the recent vulnerabilities commonly referred to as "Spectre" and "Meltdown". HP has published a security bulletin with patches for these issues and a list of impacted systems. We will continue to update the bulletin as more information becomes available and encourage customers to check the bulletin frequently.

hp-concentra-wrapper-portlet

Actions
Loading...

HP Network Scanjet 4Si Scanners - How to Configure the Scanner Hardware

The HP Network Scanjet 4Si scanner can be configured to display another language, change the default paper size for the Automatic Document Feeder, change Token Ring speed, or change frame type. The configuration menus are displayed in the following sequence:
  1. Languages
  2. Default Paper Size
  3. Token Ring Speed (will show if you have Token Ring option only)
  4. Network Frame Type
Figure : HP Network Scanjet 4Si scanner
KEY
ACTION
Scroll Keys (arrows)
Moves through the list of menus and parameter values
Menu Key
Enters the top-level menu so that you may select a parameter value
Start Key (diamond shape)
Saves changes and exits to normal use (from the top-level menu)
Stop Key (triangle in circle shape)
Ignores changes and moves to the top-level menu
Abort Key (two diagonal lines)
Ignores changes and returns the scanner to normal use (from the top-level menu)
To enter the configuration menus
Before configuring the HP Network Scanjet 4Si scanner on the server, use the following steps to configure the control panel. The configuration menus allow configuring the control panel language, network frame type, Token Ring speed (Token Ring networks only), and paper size. The value shown in each configuration menu is the currently selected value. Use the following power-up sequence to enter the configuration menus.
  1. Turn off the network box.
  2. Press and hold the stop and abort keys.
  3. Turn on the network box.
  4. After a few seconds, release the keys.
  5. The scanner control panel displays "Self-Test Initializing... Wait."
  6. When it is ready for you to enter the configuration menus, the display will read "Press Menu to Select Languages."
To select the display language
The control panel is capable of displaying in one of six languages: English, French, German, Italian, Portuguese, or Spanish. Skip this section if you want the scanner to display English, which is the factory default.
  1. Press Menu to enter the Languages menu. "Current Language: English" appears on the control panel.
  2. Press a scroll key repeatedly until the desired language appears.
  3. Press Menu to select the language and return to the top-level menu.
  4. Press a scroll key to move to the Default Paper Size menu; press the start key to save changes and return to normal use or press the stop key to ignore changes and move to the next menu.
      note:
    The control panel displays its messages in the language that you have selected.
To select the default paper size
The scanner is capable of setting Letter, A4, or Legal paper sizes as the default paper size on the control panel. Skip this section if you want the HP Network Scanjet 4Si scanner to boot with Letter-sized paper selected, which is the factory default.
  1. Press a scroll key until "Press menu to select Default Paper Sizes" appears.
  2. Press Menu to enter the Default Paper Size menu. "Current Paper Default: Letter" appears on the control panel.
  3. Press the scroll forward key repeatedly until the desired paper size appears.
  4. Press Menu to select the paper size displayed and return to the top-level menu.
  5. Press a scroll to move to the Token Ring Speed menu (if you have a Token Ring network) or Network Frame Type menu (if you have an Ethernet network); press the start key to save changes and return to normal use or press the abort key to ignore changes and return to normal use.
To select the Token Ring speed (Token Ring networks only)
If you have a Token Ring network, you can select the Token Ring speed. Skip this section if you do not have a Token Ring network or if you want the HP Network Scanjet 4Si scanner to use Token Ring speed 16, which is the factory default.
  1. "Press Menu to select Token Ring speeds" appears on the display.
  2. Press Menu to enter the Token Ring Speed menu. "Token Ring speed: 16" will be displayed on the control panel.
  3. Press a scroll key repeatedly until the desired Token Ring speed appears.
  4. Press Menu to select the token ring speed that is displayed.
  5. Press scroll forward to move to the Network Frame Type menu; press the start key to save changes and return to normal use; or, press the abort key to ignore changes and return to normal use.
      note:
    If Token Ring speed has been changed, the HP Network Scanjet 4Si scanner will automatically reboot after exiting the Configuration Menu.
To select the network frame type
The HP Network Scanjet 4Si scanner is capable of operating with the following network frame types: Ethernet 802.2, Ethernet 802.3, Ethernet SNAP, Ethernet II, Token Ring, or Token Ring SNMP. Skip this section if you want the HP Network Scanjet 4Si scanner to use the Ethernet 802.3 frame type for Ethernet networks or Token Ring for Token Ring networks, which are the factory defaults for each network.
  1. "Press Menu to select Frame types" appears on the display.
  2. Press Menu to enter the Network Frame Type menu. "Current Frame Type: Ethernet 802.3" appears on the control panel.
  3. Press the scroll forward key repeatedly until the desired frame type appears.
  4. Press Menu to select the frame type that is displayed and return to the top-level menu.
  5. If you have completed your configuration, press the start key to return to normal use. Otherwise, press scroll forward to return to the Languages menu, or press the stop key to ignore changes and return to normal use.
      note:
    If the network frame type has been changed during configuration, the scanner will automatically reboot after exiting the Configuration Menu.
The HP Network Scanjet 4Si scanner displays the message "Network Scanjet 4Si unconfigured" with the scanner's node address on the control panel display. You will need this address when you configure the scanner on the server. For instructions on configuring the HP Network Scanjet 4Si scanner on the server, see the document "HP Network Scanjet 4Si Scanner - Software Installation and Configuration."

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...