hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    We are upgrading our website

    If you experience errors during this time, please try again later. 

hp-concentra-wrapper-portlet

Actions
Loading...

HP Jornada 520, 525, 540, 545, 547, 548 - How Do I Attach the Minstrel 540 to the HP Jornada Pocket PC

Before beginning
Before configuring and using the wireless modem, the footmount must be installed. Please review all the instructions for installing the footmount, attaching, and removing the Minstrel 540 from the HP Jornada before beginning.
Installing the footmount
To install the footmount, follow these steps:
  1. Remove the top two screws on the back of the HP Jornada using the enclosed screwdriver. (See Figure 1.)
  2. Place the footmount flat against the back of the HP Jornada, with the hollow side facing against the HP Jornada.
  3. Ensure that the holes on the footmount are aligned with the newly opened screw holes on the HP Jornada.
  4. Insert the screws provided in the installation kit through the holes in the footmount and into the holes on the HP Jornada.
  5. Tighten the screws with the enclosed screwdriver to secure the footmount in place.
  note:
The screws provided in the installation kit must be used for installing the footmount. Be sure to keep the original HP Jornada screws in a safe place, as they must be used in the HP Jornada if the footmount is removed.
Figure : Installing the Footmount
The steps provided in the Installing the footmount section only need to be completed once. The footmount is designed to stay permanently attached to the HP Jornada. Once the footmount is installed, the HP Jornada can be easily inserted into and removed from the Minstrel 540.
Attaching the HP Jornada
To insert the HP Jornada into the Minstrel 540 cradle, follow these steps:
  1. Position the devices so the back of the HP Jornada lies flat against the front of the Minstrel 540. (See Figure 3.)
  2. Ensure the two connectors of the Minstrel 540 are aligned with the connector slots on the bottom edge of the HP Jornada.
  3. Slide the HP Jornada downward until the latching mechanism clicks into place.
Figure : Attaching the HP Jornada
Removing the HP Jornada
To remove the HP Jornada from the Minstrel 540, depress the two buttons on the sides of the Minstrel 540 and slide the HP Jornada in an upward direction. (See Figure 3.)
The footmount is designed to stay permanently attached to the HP Jornada unit. There is no need to remove the footmount when the HP Jornada is not inserted into the Minstrel 540.
Figure : Removing the HP Jornada

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...