HP OmniGo 100 and 120 - Backing Up OmniGo File To SRAM Card
How do you back up data from the HP OmniGo to a PCMCIA SRAM card?
Here is a copy of the instructions found in the HP OmniGo Quick Start and User's Reference Guide:
"First, make sure the HP OmniGo is turned off when the card is added. If the unit is not turned off when the card is added or removed, a system error may occur resulting in loss of data. The correct method for removing the card is to tap the Card Removal Icon, which is located on the Home screen (F4), and follow the instructions.
After the card is inserted, tap the Transfer Icon. If the card has not been formatted, it can be formatted at this time. Once the card is ready for data transfer, select the files to be transferred from the HP OmniGo to the card. This is done by using the arrow keys to toggle between memory files and using the space bar to select each file for transfer.
Once all files are selected, select Copy (F2). This will move the files to the card. Once this is done, tap the Home Icon and remove the SRAM card in the appropriate manner. A restore of the data from the card to the HP OmniGo is performed in the same manner, except the files on the right side of the transfer screen must be selected and Copy (F3) must be used."
Ask the community!
Country: United States