hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP CD-ROM Server/Tower and Expansion Tower for Ethernet Networks - The Status LED Remains On After Power-Up

Issue:
The status LED remains on after power-up.
Solution
Power cycle the CD-ROM Server. If the status LED is still on, check the front panel indicators and check the error table to help identify problems.
ERROR CONDITIONS
The following table details how the front panel indicators show various error conditions for CD-ROM Server products with firmware versions 4.11 to 4.20:
Event
Status LED
CD LED
Network LED
CD-ROM has incorrect format or SCSI bus not connected*
OFF
Flash
Flash**
Faulty network connection
OFF
OFF
Illegal LAN hardware address
Flash
Flash
Flash
Flash load failed
Flash
OFF
OFF
Error in EEPROM
Flash
OFF
OFF
Error in FLASH PROM
Flash
OFF
Flash
Error in SRAM
Flash
Flash
OFF
Error in DRAM/DIMM
Flash
OFF
OFF
Error in DRAM/DIMM configuration error
Flash
Flash
OFF
Software/hardware combination error
Flash
Flash***
Flash***
* Check the stat.txt file in the server’s config folder for more information.
** The Network LED will flash when there is network traffic.
*** The CD LED and Network LED flash alternately in this condition.
The following table details how the front panel indicators show various error conditions for CD-ROM Server products with firmware 4.23:
STATUS
CD
NETWORK
DISC
ON/BUSY
PROBLEM to LOOK UP
Off
-
Off
On w/CD in
On w/no CD
Network connection faulty
Off
Flash
Blink*
Off w/CD in or
Flash
On w/CD in
CD is defective/ unreadable or SCSI bus
Disconnected.
Check config\stat.txt file
Off
Off
Blink*
Off
Off w/CD in
CD has unsupported format.
Off
On
-
Off
Flash in series of 5
CD read problem or drive problem
Flash
-
-
On w/CD in
Off w/CD in
SCSI ID conflict with server
Flash
Flash
Blink*
On w/CD in
Off w/CD in
Illegal LAN hardware address
Flash
Off
Off
On w/CD in
Off w/CD in
Server failure: Flash load failed or error in EEPROM
Flash
Off
Blink*
On w/CD in
Off w/CD in
Server failure: error in FLASH PROM
Flash
Flash
Off
On w/CD in
Off w/CD in
Run server diagnostic: error in SRAM or DRAM/DIMM configuration error
Flash
Off
Off
On w/CD in
Off w/CD in
Run server diagnostic: error in DRAM/DIMM
Flash
Flash**
Flash**
On w/CD in
Off w/CD in
Software/hardware combination error
* Blinks in synchronicity with activity or access
** The CD and NETWORK indicators flash alternately in this condition.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...