This document is for HP LaserJet Pro M15a, M15w, M16a, M17a, and M17w printers.
This document provides instructions for loading plain paper or envelopes into the printer.
hp-support-head-portlet
動作
- ${title}
正在載入...
HP 顧客貼心服務 - 知識庫
hp-contact-secondary-navigation-portlet
動作
- ${title}
正在載入...
hp-share-print-widget-portlet
動作
- ${title}
正在載入...
hp-concentra-wrapper-portlet
動作
- ${title}
正在載入...
HP LaserJet Pro M14-M17 Printer Series - Loading Paper, Envelopes
Load plain paper
Load plain unused paper in the input tray.
-
Pull down the output tray.
-
Load a stack of U.S. letter or A4 size paper into the input tray with the short edge forward and the print side up. Push the stack into the tray until it stops.
警告:
To prevent jams, do not overfill the tray.
-
Slide in the paper guides until they rest against the edges of the paper. Do not push the paper guides so far in that they bind the paper.
附註：
Before printing, select the correct paper size and settings.
Load envelopes
Load several envelopes in the input tray.
Envelope guidelines
Refer to the following guidelines to make sure the envelopes print successfully.
-
Do not use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials that are susceptible to heat.
-
Do not use envelopes that are wrinkled, nicked, stuck together, or otherwise damaged.
-
If you use envelopes with peel-off adhesive strips, make sure they are approved for use in laser printers.
-
Only use envelopes recommended for laser printers.
-
Use envelopes with seams that extend to the corners.
-
Acceptable
-
Unacceptable
描述 : Examples of envelope seams
-
Load envelopes in the input tray
Load envelopes in the input tray to print addresses for the recipient and sender.
-
Pull down the output tray.
-
Load a stack of envelopes into the input tray with the short edge forward and the print side up. Push the stack into the tray until it stops.
-
If the envelope flap is on the short edge, position the envelope with the flap-side up, and then insert the short edge without the flap toward the printer.
-
If the envelope flap is on the long edge of the envelope, position the envelope with the flap-side down, and then insert the short, postage edge toward the printer.
描述 : Envelope orientation
警告:
To prevent jams, do not overfill the tray. -
-
Slide in the paper guides until they rest against the edges of the envelopes.
附註：
Before printing, select the correct envelope size and settings.
其他支援選項
{{#each this}}
{{#if (eq ../this.length 3)}}
{{else if (eq ../this.length 2)}}
{{else}}
{{/if}}
{{/each}}
hp-feedback-input-portlet
動作
- ${title}
正在載入...
hp-feedback-banner-portlet
動作
- ${title}
正在載入...
hp-country-locator-portlet
動作
- ${title}
正在載入...
國家/地區：
臺灣地區
hp-detect-load-my-device-portlet
動作
- ${title}
正在載入...
hp-hero-support-search
動作
- ${title}
正在載入...
