This document provides instructions for loading plain paper, photo paper, and envelopes into the printer.
hp-support-head-portlet
動作
- ${title}
正在載入...
HP 顧客貼心服務 - 知識庫
hp-contact-secondary-navigation-portlet
動作
- ${title}
正在載入...
hp-share-print-widget-portlet
動作
- ${title}
正在載入...
hp-concentra-wrapper-portlet
動作
- ${title}
正在載入...
Loading Paper and Envelopes for HP Deskjet 3510 and Deskjet Ink Advantage 3510 e-All-in-One Printer Series
Introduction
Loading plain paper
Use the following steps to load paper in the printer.
-
Raise the input tray.描述 : Raise the input tray
-
Lower the output tray.描述 : Lower the output tray
-
Pull out the tray extender.描述 : Pull out the tray extender
-
Load plain white paper into the input tray with the short edge forward and the print side up.描述 : Load the paper into the input tray
-
Slide the paper width guide inward until it rests against the edge of the paper.描述 : Slide the paper width guide inward
Loading photo paper
Use the following steps to load photo paper in the printer.
-
Raise the input tray.描述 : Raise the input tray
-
Lower the output tray.描述 : Lower the output tray
-
Pull out the tray extender.描述 : Pull out the tray extender
-
Load a stack of photo paper into the input tray with the short edge down and print side up. Slide the stack of paper in until it stops.
附註：
If the photo paper you use has perforated tabs, load the paper so that the tabs are on top. -
Slide the paper width guide inward until it rests against the edge of the paper.描述 : Slide the paper width guide inward
附註：
Do not leave any photo paper in the input tray after you finish printing, as the quality of the paper might deteriorate. Store photo paper in a sealed bag in a cool, dark place.
Loading envelopes
Use the following steps to load envelopes in the printer.
附註：You can load one or more envelopes in the tray, but do not load more than five envelopes at a time. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.
-
Raise the input tray.描述 : Raise the input tray
-
Lower the output tray.描述 : Lower the output tray
-
Pull out the tray extender.描述 : Pull out the tray extender
-
Load one or more envelopes into the far-right side of the input tray. Make sure the side to be printed on faces up, and the side with the flap is on the left, facing down.
-
Slide the paper width guide inward until it rests against the edge of the paper.描述 : Slide the paper width guide inward
其他支援選項
{{#each this}}
{{#if (eq ../this.length 3)}}
{{else if (eq ../this.length 2)}}
{{else}}
{{/if}}
{{/each}}
hp-feedback-input-portlet
動作
- ${title}
正在載入...
hp-feedback-banner-portlet
動作
- ${title}
正在載入...
hp-country-locator-portlet
動作
- ${title}
正在載入...
國家/地區：
臺灣地區
hp-detect-load-my-device-portlet
動作
- ${title}
正在載入...
hp-hero-support-search
動作
- ${title}
正在載入...
