This document describes how to load paper and envelopes into the printer.
hp-support-head-portlet
動作
- ${title}
正在載入...
HP 顧客貼心服務 - 知識庫
hp-contact-secondary-navigation-portlet
動作
- ${title}
正在載入...
hp-share-print-widget-portlet
動作
- ${title}
正在載入...
hp-concentra-wrapper-portlet
動作
- ${title}
正在載入...
Loading Paper and Envelopes for HP LaserJet Pro 200 Color MFP M276n and M276nw Printers
Introduction
Loading paper
Follow these steps to load paper.
Loading the paper input tray
Follow these steps to load paper into the paper input tray.
-
Pull out the paper input tray.描述 : Pull out the paper input tray
-
Slide the paper guides to their outermost positions.描述 : Slide out the paper guides
附註：
To load legal-size paper, extend the tray by pressing and holding the extension tab while pulling the front of the tray outward.描述 : Extend tray for legal paper
-
Place the stack of paper print side up in the tray, and then make sure that the stack is flat at all four corners.
-
Slide the paper guides inward so that they rest against the stack of paper.描述 : Slide the paper guides inward
-
Push down on the paper to make sure that the paper stack sits below the paper limit tabs on the sides of the tray.
附註：
The tray capacity is 150 sheets.描述 : Push down on the paper
-
Slide the paper tray into the printer.描述 : Insert the paper tray
Loading Envelopes
Envelope Guidelines
-
Do not use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials that are susceptible to heat.
-
Do not use envelopes that are wrinkled, nicked, stuck together, or otherwise damaged.
-
If you use envelopes with peel-off adhesive strips, make sure they are approved for use in laser printers.
-
Only use envelopes recommended for laser printers.
-
Use envelopes with seams that extend to the corners.
-
Acceptable
-
Unacceptable
-
Follow these steps to load envelopes into the paper input tray.
-
Pull the paper tray out of the printer.描述 : Pull out the paper tray
-
Slide the paper guides to their outermost positions.描述 : Slide out the paper guides
-
Remove any paper from the tray.
- Load envelopes in the middle of the tray with the print side facing up and the stamp end in first.描述 : Load envelopes this way
附註：
The tray capacity is 10 envelopes. -
Slide the paper guides inward so that they rest against the envelopes.
-
Slide the paper input tray back into the printer.
其他支援選項
{{#each this}}
{{#if (eq ../this.length 3)}}
{{else if (eq ../this.length 2)}}
{{else}}
{{/if}}
{{/each}}
hp-feedback-input-portlet
動作
- ${title}
正在載入...
hp-feedback-banner-portlet
動作
- ${title}
正在載入...
hp-country-locator-portlet
動作
- ${title}
正在載入...
國家/地區：
臺灣地區
hp-detect-load-my-device-portlet
動作
- ${title}
正在載入...
hp-hero-support-search
動作
- ${title}
正在載入...
