Error:

Bu tarayıcıda Javascript geçersiz kılınmış. Bu sayfa için Javascript gerekir. Tarayıcınızın ayarlarını değiştirerek Javascript yürütülmesini etkinleştirin. Yönergeler için tarayıcınızın belgelerine bakın.

hp-support-head-portlet

İşlemler

Yükleniyor...

HP Müşteri Desteği - Bilgi Tabanı

hp-contact-secondary-navigation-portlet

İşlemler

Yükleniyor...

hp-share-print-widget-portlet

İşlemler

Yükleniyor...

Bilgi

Windows 11'e Nasıl Yükselteceğinizi Öğrenin
Windows 11'e Yükseltme Kılavuzu

Geri Bildirim

hp-concentra-wrapper-portlet

İşlemler

Yükleniyor...

Loading Paper and Envelopes for the HP Deskjet 3050A (J611) and 3050 (J610) All-in-One Printer Series

Introduction

This document provides instructions for loading plain paper, photo paper, and envelopes.

Loading plain paper

Use the following steps to load paper in the product.

Raise the input tray.

Şekil : Raise the input tray
Lower the output tray, and then pull out the tray extender.

Şekil : Pull out the tray extender
Slide the paper width guide to its outermost position.

Şekil : Slide the paper width guide to its outermost position
Load a stack of plain paper into the input tray, print-side up. Slide the stack of paper in until it stops.

Şekil : Load paper
Slide the paper width guide snugly against the paper.

Şekil : Slide the paper width guide snugly against the paper

Loading photo paper

Use the following steps to load photo paper in the product.

Raise the input tray.

Şekil : Raise the input tray
Lower the output tray, and then pull out the tray extender.

Şekil : Pull out the tray extender
Slide the paper width guide to the left.

Şekil : Slide the paper width guide to the left
Load a stack of photo paper into the input tray with the short edge down and print-side up. Slide the stack of paper in until it stops.

not:
If the photo paper you are using has perforated tabs, load the paper so that the tabs are on top.
Slide the paper width guide inward until it stops at the edge of the paper.

Şekil : Slide the paper width guide inward

not:
Do not leave any photo paper in the input tray after you finish printing, as the quality of the paper might deteriorate. Store photo paper in a sealed bag in a cool, dark place.

Loading envelopes

Use the following steps to load envelopes in the product.

not:
You can load one or more envelopes in the tray, but do not load more than five envelopes at a time. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.

Raise the input tray.

Şekil : Raise the input tray
Lower the output tray, and then pull out the tray extender.

Şekil : Pull out the tray extender
Slide the paper width guide to the left.

Şekil : Slide the paper width guide to the left
Load one or more envelopes into the far-right side of the input tray with the print-side up and with the flap on the left-side, and then slide the paper width guide inward until it stops at the edge of the envelopes.

Şekil : Load envelopes