Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

HP Smart Tank Printers - Color or black ink not printing, other print quality issues

The quality of a printed document from your HP Smart Tank 670, 720, 750, 6000, 7000, or 7300 series printer is not as expected, color or black ink does not print, or printouts are smeared, fuzzy, dark, or faded.

Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.

Check ink levels and fill ink tanks

Low ink levels can impact print quality. Refill any tanks that are low on ink.

HP recommends that you use genuine HP ink. HP cannot guarantee the quality or reliability of non-HP ink. If you do not use genuine HP ink and HP printheads, the steps in this document might not resolve print quality issues.

Note:

Purchase replacement cartridges and other supplies from the HP Store or local retailers.

On the control panel, look for KYMC and the blinking Ink icons . The Printhead icons might also blink.
Fill any tanks that are low on ink.

Make sure you are using the correct paper for your print job

Make sure the paper you are using matches the print job. If it is not, reload the printer with the correct paper type.

Load the paper print side down in the input tray. Many papers have printing and non-printing sides, such as photo paper and envelopes. Usually, the smoother side is the "print side," and sometimes, the non-print side has a logo of the paper manufacturer on it.
Do not use wrinkled or curled paper. Use only clean, wrinkle-free paper.
Use the correct paper type for your project.
- For everyday text documents, plain paper with ColorLok technology works well. Paper with ColorLok technology is industry-standard paper that works well with HP ink.
- For documents with dense printing, such as high contrast graphics or photos, use HP Advanced Photo Paper for best results.
- Some paper might not absorb ink as well as others. If your prints smear easily, make sure you are using a recommended paper.
Store photo paper in its original packaging inside a resealable plastic bag. Store the paper on a flat surface in a cool, dry place. Load 10-20 sheets of photo paper only when you are ready to print, and then put the unused paper back in the packaging.
Try using a different paper. This determines if the problem is related to the paper.

Check the print settings

Sometimes the print settings can affect print quality. Check print settings to make sure that they are appropriate for your print job.

Check print settings using HP Smart

Adjust print settings to improve quality by printing a photo from the HP Smart app.

Open the HP Smart app, and then click Print Documents or Print Photos.
Browse to the document or photo, and then click Print.

The Print window opens.
Depending on your print job, you might consider modifying the following settings:
- Media Type: Select the appropriate type of paper, such as photo paper, plain paper, or labels.
- Quality: Increase the print quality mode from Normal or Draft to Best.
- Paper Size: Select the correct paper size for your print job.
Click Print.

Check print settings in Windows

Check the print settings for your print job in Windows.

In the software application you are trying to print, click File > Print.

The Print window opens.
Open the Properties dialog box.

Depending on the software application, the button might be Properties, Options, Printer Setup, Printer, or Preferences.
Depending on your print job, you might consider modifying the following settings:
- Paper Type: If you are printing on photo paper, select the type of photo paper you are attempting to print on.
- Quality: If you are dissatisfied with the quality of your printouts, increase the print quality. To print more quickly, decrease the print quality. These options typically include Best, Normal, and Draft modes.
- Paper Size: If you are printing on a different size of paper than you normally print on, select the correct paper size.
- Black and White: If you want to print in black and white only, select the grayscale option.
After selecting the print settings, click OK > Print.

Check print settings in macOS

Check the print settings for your print job in macOS.

Open a document or photo, and then click File > Print.

The Print window opens.
At the lower-left side, click Show Details.
Click the Preview drop-down list, and then select Media & Quality.
Depending on your print job, you might consider modifying the following settings:
- Paper type: If one of the options matches your paper type exactly, select that option.
- Quality: If you are dissatisfied with the quality of your printouts, increase the print quality. To print more quickly, decrease the print quality.
To save your settings for future print jobs, select Save Current Settings as Preset in the Presets menu, and then name the new preset.

Check for ink smears on the back of printouts

If there are smears of ink on the back of your printouts, you can use an automated tool in the HP Smart app to resolve the issue.

Clean smears in Windows, Mac

Use the HP Smart app on your Windows PC or Mac to clean smears.

Make sure your computer is connected to your printer with a USB cable or wireless network.
Open the HP Smart app, and then select your printer.
Click your printer, and then click Advanced Settings.
Click Print Quality Toolbox.
Next to Clean Smear, click Clean.

A Rib Smear cleaning in progress message displays, and the printer slowly ejects a blank page.
Wait until the printer is idle and silent, and then click OK in the app.

Clean smears in Android, iOS

Use the HP Smart app on your Android and iOS mobile device to clean smears.

Make sure your printer is connected to the same wireless network as your mobile device.
Open the HP Smart app, and then select your printer.
Tap your printer, and then tap Print Quality Tools.
Next to Clean Smear, tap Clean.

A Rib Smear cleaning in progress message displays, and the printer slowly ejects a blank page.
Wait until the printer is idle and silent, and then tap OK in the app.

Print a Print Quality Diagnostic Page

To resolve many print quality issues, print a Print Quality Diagnostic Page, and then evaluate the results.

On the printer control panel, press and hold the Information button for five seconds to enable support mode.

All buttons on the control panel light up.
Press and hold the Color Copy button for three seconds.

A Print Quality Diagnostic Page prints.
Review the test patterns, checking for missing colors, fading, and white lines.
- If you find defects on the page, continue to the next step.
- If you do not find defects on the page, skip to the step to Replace the printheads.

Clean the printheads

Clean the printheads if you find defects on Test Pattern 2 of the Print Quality Diagnostic Page.

Note:

If you did not find defects on Test Pattern 2, skip to the next step. Unnecessary cleaning wastes ink.

Clean the printheads in Windows, Mac

Use the HP Smart app to clean the printheads.

Make sure your computer is connected to your printer with a USB cable or wireless network.
Open the HP Smart app, and then select your printer.
Click your printer, and then click Print Quality Tools.
Click Clean Printhead.

A Printhead cleaning in progress message displays, and the printer prints a Print Quality Diagnostic Page.
Examine the page.
- If Test Pattern 2 is free of defects, continue to the next step.
- If Test Pattern 2 still has defects, click Level 2 cleaning.

Clean the printheads in Android, iOS

Use the HP Smart app to clean the printheads.

Make sure your printer is connected to the same wireless network as your mobile device.
Open the HP Smart app, and then select your printer.
Tap your printer, and then tap Print Quality Tools.
Next to Clean Printhead, tap Clean.

A Printhead cleaning in progress message displays, and the printer prints a Print Quality Diagnostic Page.
Examine the page.
- If Test Pattern 2 is free of defects, continue to the next step.
- If Test Pattern 2 still has defects, tap Level 2 cleaning.

Align the printheads

Align the printheads from the printer software.

Load paper into the input tray.
Open the HP printer software, and then click Print, Scan & Fax.
In the Print section, click Maintain Your Printer.

Toolbox opens.
Click the Device Services tab, and then follow the on-screen instructions.

If you have followed all the steps in this document and your printer still has print quality issues, replace one or both printheads.

Replace the printhead

Remove the faulty printhead, and then install the new replacement.

Turn on the printer.
Lift the ink access door, and then wait until the carriage stops.
Press the blue button on the carriage to open the printhead cover.
Remove the printhead from the carriage, and then set it aside on a protected surface.

CAUTION:
To prevent ink from leaking, hold the printhead by its sides and keep the printhead upright at all times.
Remove the new printhead from its package.
Pull the plug straight up from the top of the printhead.
Remove the tape from the printhead contacts using the pull tabs.

CAUTION:
Do not touch the copper-colored contacts or the ink nozzle. Do not replace the protective tape on the contact. Handling these parts can result in clogs, ink failure, and bad electrical connections.
Insert the new printhead into its slot until it snaps into place.
Close the printhead cover.
Close the ink access door.
Align the printheads.
- If your printer has a touchscreen control panel, follow the control panel prompts to print an Alignment page, and then follow the instructions on the page to scan it and align the new printheads.
- If your printer does not have a touchscreen control panel, an A blinks on the control panel and an Alignment page prints automatically. Follow the instructions on the page to scan it and align the new printheads.

Service the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Flag

Thailand

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "DeskJet Ink Advantage 2130 paper jam", "TouchSmart 9100 bios update"