HP OfficeJet Pro 7720 Printers - Loading Paper, Cards, Envelopes

1. Pull out the paper tray.
   Figure : Pulling out the paper tray

   
2. Slide out the paper-width guides as far as possible.
   Figure : Sliding out paper-width guides

   
3. Load a stack of plain paper in portrait orientation with the print-side facing down in the center of the tray, and then slide the stack forward until it stops.
   Figure : Loading the paper

   
4. Make sure the stack of paper does not exceed the paper fill guide on the side of the tray.
   Figure : Paper fill guide in the paper tray

   
5. Slide in the paper guides until they rest against the stack of paper.
   Figure : Sliding in the paper width guides

   
6. Insert the tray into the printer, and then pull out the output tray extension to desired length.
   Figure : Inserting the paper tray and pulling out the output tray extender

   

note:

Before printing or copying, select the correct paper size and paper type settings from the control panel or computer.

1. Pull out the paper tray.
   Figure : Pulling out the paper tray

   
2. Slide out the paper-width guides as far as possible.
   Figure : Sliding out paper-width guides

   
3. Insert the stack of envelopes print side down in the center of the tray.
   Make sure to position envelopes with the flap on the short edge away from the printer, and position envelopes with the flap on the long edge with the flap to the left.
   Figure : Inserting envelopes print side down

   
4. Make sure the stack of envelopes does not exceed the paper fill guide on the side of the tray.
   Figure : Paper fill guide in the paper tray

   
5. Slide in the paper guides until they rest against the stack of envelopes.
   Figure : Sliding in the paper width guides

   
6. Reinsert the input tray.
   Figure : Reinserting the input tray

   
7. Pull out the output tray extension to desired length.

note:

Before printing on the envelopes, select the correct envelope size and settings when printing or copying.

1. Pull out the paper tray.
   Figure : Pulling out the paper tray

   
2. Slide out the paper-width guides as far as possible.
   Figure : Sliding out paper-width guides

   
3. Insert a stack of cards or photo paper print side down in portrait orientation in the center of the tray.
   Figure : Inserting paper or card print side down

   
4. Make sure the stack of cards or photo paper does not exceed the paper fill guide on the side of the tray.
   Figure : Paper fill guide in the paper tray

   
5. Slide in the paper guides until they rest against the stack of cards or photo paper.
   Figure : Sliding in the paper width guides

   
6. Reinsert the input tray.
   Figure : Reinserting the input tray

   
7. Pull out the output tray extension to desired length.

   note:

   Before printing on the cards or photo paper, select the correct paper size and settings when printing or copying.