hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Scanjet Professional 3000 Sheet-feed Scanner - How to Perform a Hardware Test

Information

This document explains how to perform a hardware self test on an HP Scanjet Professional 3000 Sheet-feed Scanner.

Details

The steps are listed below:
  1. Turn off the unit.
  2. Unplug the USB cable.
  3. Press and hold the Cancel and Scan button while turning the scanner and continue holding them until the light in the front of the scanner turns red (7-8 seconds).
  4. Load some pages into the scanner.
  5. Press and release the Scan Document button.
  6. During a successful self-test, the sheet-feeder will perform as follows: Documents will start feeding.
  7. To end the test, disconnect the power cable from the scanner.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Slovakia

hp-detect-load-my-device-portlet

Actions
Loading...