hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Fix HP Printer issue on macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet 4200/4250/4300/4350 Printer Series - How to Replace Fuser

Information

This document describes fuser removal and replacement for the HP LaserJet 4200/4250/4300/4350 printer series.

Details

  warning:
The fuser might be very hot. After turning off the printer power, allow the fuser to cool for at least 30 minutes before removing it.
  1. Remove the rear output bin.
    To remove the rear output bin, complete the following steps:
    1. Open the rear output bin.
      note:
      If the duplexer is installed, lift it up slightly and pull it away from the printer to remove it.
    2. Squeeze the hinge pin out of its mounting hole.
    3. Rotate the output bin away from the printer until the right hinge pin is released, and then remove the output bin.
  2. Squeeze the blue fuser-release tabs.
  3. Pull the fuser straight back and out of the printer.
      caution:
    Do not drop or jar the fuser. It can easily be damaged if it is mishandled.
    Hint: When you replace the fuser, make sure that it is fully seated into the printer. You should hear both sides snap into place.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Slovakia

hp-detect-load-my-device-portlet

Actions
Loading...